FATEK SD3 Series, Инструкция по эксплуатации, Страница: 152 / 396

10
[ - ]
5. Setting Parameters
SD3 Series Instruction Manual
3. Using the Setup Panel
6 Positioning Status
7 ABS Position Command
: Fixed to positive
: Executing Positioning : Positioning Complete
Positioning Status in Position Control Mode
[ command pulse ]
Indicates a Position command value based on Home position offset
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
Status No. 64
Status No. 74
[ command pulse ]
Indicates the motor angular position returned from the encoder.
8 ABS Position Feedback
9 Command Position Deviation
[ command pulse ]
Indicates the difference between the position command value
and position feedback value.
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
: +/－ sign : first 5 digits : last 5 digits
Current display signs
(Press to change the display.)
Status No. 76
Status No. 78