FATEK SD3 Series, Инструкция по эксплуатации, Страница: 183 / 396

41
5
Setting Parameters
5. Setting Parameters
SD3 Series Instruction Manual
5. Parameters
5. Parameters
No. 64.0
Positioning complete:
Determination method
Settings Default Characteristics
0, 1 0
Function
Use
Select one of two methods to output the Positioning Complete signal.
Settings
Signal Output Conditions
Position
Deviation Speed
Pulse Train
command input Parameter settings
0 ○ ○ -
Detection criteria
- Range (No.68.0)
- Speed (No.69.0)
1 ○ ○ ○
Detection criteria
- Range (No.68.0)
- Speed (No.69.0)
- command input (No.70.0)
Related To No.68.0, No.69.0, No.70.0, No.71.0
No. 65.0
Position deviation error detection:
Switch
Settings Default Characteristics
0 to 3 1
Function
Use
Specify what to output when excessive position deviation is detected.
Settings Output selection
0 No detect (No output)
1 Alarm output
2 Warning output
3 Alarm and Warning output
When using Torque command limit, select 0 (No output) so that an alarm will not occur in a torque
limit state.
Related To No.87.0, No.89.0, No.363.0, No.365.0
No. 65.1
Speed deviation error detection:
Switch
Settings Default Characteristics
0, 1 1
Function
Use
Enable/Disable Speed Deviation Error Detection.
Settings Speed deviation error detection
0 Disable
1 Enable
When using Torque command limit, select "Disable" so that an alarm will not occur during limiting.
Related To No.90.0, No.91.0
-
-