FATEK SD3 Series, Инструкция по эксплуатации, Страница: 12 / 396

6 SD3 Series Instruction Manual
1. Introduction
1. Important Safety Instructions
CAUTION
Transportation and Storage
Do not store the product at a location subject to water or moisture, or
where toxic gases or liquids are present.
Do not hold the cables or motor shafts during transportation.
When transporting the amplifier and monitor, do not drop them or let
them fall.
When the product has been stored for an extended time, contact our
customer service center.
Store the product in suitable storage environments as specified in the
instruction manual.
Additional Precautions
Maintenance and Inspection
Prior to disposal of the batteries, insulate them with tape or other material. Dispose of them
following the local laws and regulations.
When disposing of this product, treat it as industrial waste.
Never attempt to overhaul the product.
Do not power cycle too frequently.
The motor, heat sink of the amplifier, and regenerative resistor may
become dangerously hot. Do not touch any of them with hands when
power is on or for a while after power shutdown.
If the amplifier or motor fails, shut down both the control power supply
and the main circuit power supply.
When not using the product for an extended period, be sure to turn the
power off.
Sign Precautionary Measures If Not Observed