Section 18 — Audio Track Applications
Using Audio Tracks for Audio Monitoring
3
• Press the left Audio Track button so that the red LED is lit. You should now be hearing the
microphone signal though the ASR-10.
• Adjust the Input Level control (on the rear panel) so that the signal is present (green Input
Level LED lit) but only peaks occasionally (red Input Level LED lit). Remember, the red Input
Level LED lights at 6dB below clipping.
• Press the FX Select•FX Bypass button and use the Up/Down Arrow buttons to select
FX=ROM-10 CHOR+REV+DDL. The display shows:
STOP
• Press Edit, then Effects. The display shows the Effect variations screen for the
Delay effect. You can select different parameters for editing by scrolling with
the Left/Right Arrow buttons, and changing the values with the Up/Down Arrow buttons.
Remember, as soon as you change a value, or edit any parameter, the ROM effect becomes the
Bank effect.
Once you’ve edited the effect for your particular application, you can assign different output
routings (you can still go back and edit the effect parameters after you’ve assigned the output
routings). To assign the output routings:
• Select Instrument•Sequence Track 1 (the drum kit). The LED for Instrument•Sequence
Track 1 is solidly lit yellow.
• Press Edit, then Track. Using the Left/Right Arrow buttons, scroll until the display shows
OUT= (output name). With the Up/Down Arrow buttons, select OUT= BUS2 JUST REVERB.
• Select Instrument•Sequence Track 2 (the bass). You should still be on the Edit/Track OUT=
screen. Notice that the Instrument•Sequence Track 2 LED is solidly lit yellow.
• With the Up/Down Arrow buttons, select OUT= BUS1 REVRB.
• Select Instrument•Sequence Track 3 (the piano). You should still be on the Edit/Track OUT=
screen. Notice that the Instrument•Sequence Track 3 LED is solidly lit yellow.
• With the Up/Down Arrow buttons, select OUT= BUS3 DELAY LINE.
• Select Instrument•Sequence Track 4 (the horn section). You should still be on the Edit/Track
OUT= screen. Notice that the Instrument•Sequence Track 4 LED is solidly lit yellow.
• With the Up/Down Arrow buttons, select OUT= AUX 1. This will send the audio output of
the Horn Section only to the AUX 1 Output jacks, and not to the Main Outputs. The output of
the AUX jacks is always dry, and can be connected to an additional external effects processor,
like the ENSONIQ DP/4, for instance.
• Select Audio Track A (the microphone). Although you have now selected an Audio Track,
you should still see its Edit/Track OUT= screen. The Audio Track A yellow LED is solidly lit.
Notice that the last selected Instrument•Sequence Track LED is flashing. This indicates that
it can still be played from the keyboard, but is no longer selected for editing.
• With the Up/Down Arrow buttons, select OUT= BUS2 JUST REVERB.
• Press the Load button, to return to solid Load mode.
Now in solid Load mode, when you play the instruments, sing in the microphone, or play a song
or sequence, you can hear how the effect routings affect each sound differently.
