Section 6 — Effect Parameters
ASR-10 Musician’s Manual
4
Edit/Effects Parameters
EARLY RFLECTION LEV
Range:
0 to 99
Controls the level of pre-echoes of the input signal added directly to the reverb output.
CHORUS RATE
Range:
0 to 99
This parameter controls the four rates of modulation of the delay time of the chorus. The delay
modulation produces vibrato and tremolo.
CHORUS AMT
Range:
0 to 99
This parameter controls the depth of vibrato and tremolo.
CHORUS MIX
Range:
0 to 99
This parameter controls the Dry/Wet mix within the chorus itself.
CHORUS FEEDBACK
Range:
-99 to +99
This parameter controls the amount of feedback applied to the chorus. The sign of the value
determines the polarity of the feedback. Feedback accentuates the complexity of the “swept”
signal.
ROM-07 REVRB
A 12-pole phase shifter with reverb. Assign a sound to BUS1 for phaser plus reverb; to BUS2 for
just reverb; and to BUS3 to bypass the effect (dry).
BUS1 REVERB MIX
Range:
0 to 99
This parameter controls the Dry/Wet mix of the Phaser into the Reverb.
BUS2 REVERB MIX
Range:
0 to 99
This parameter controls the Dry/Wet mix of the Reverb.
REVERB DECAY TIME
HI FREQ BANDWIDTH
LOW FREQ DECAY
REVERB DETUNE RATE
DIFFUSION
REVERB DETUNE AMT
HI FREQ DAMPING
See the descriptions under HALL REVERB.
EARLY RFLECTION LEV
See the description under Reverb.
PHASE CENTER
Range:
0 to 99
This parameter controls the center of the phaser width.
PHASE RATE
Range:
0 to 99
This parameter controls the rate of modulation of the phaser poles.
PHASE WIDTH
Range:
0 to 99
This parameter controls the amount of modulation applied to phaser poles.
PHASE FEEDBACK
Range:
-99 to +99
This parameter controls the amount of feedback applied to the phaser. The sign of the value
determines the polarity of the feedback.
