Section 12 — Sequencer and Audio Track Concepts
ASR-10 Musician’s Manual
20
Song Mode
Recording MIXDOWN VOLUME and MIXDOWN PAN
The song tracks can record a dynamic mixdown that allows you to record volume and pan
changes over time. You can record continuous volume changes, by editing the Edit/Track MIX
parameter while recording with SEQ REC MODE= ADD on a song track. This will record
MIXDOWN VOLUME events onto the selected song track, overriding the default MIX setting for
the corresponding sequence track. This allows you to record fade in and out mixdown
information across multiple sequences. In addition, MIXDOWN PAN events can be recorded by
editing the Edit/Track PAN parameter while recording with SEQ REC MODE= ADD. Here’s
how:
1) Select the song by pressing Edit, then Seq•Song. Double-click the Seq•Song button, and use
the Data Entry Controls to select the song (the SONG indicator will light).
2) Scroll left and set SEQ REC MODE= ADD. This will prevent any unwanted changes to
existing song track events.
3) Select the Instrument•Sequence Track that corresponds to the song track on which you
want to record MIXDOWN VOLUME.
4) While holding down Record, press Play.
5) Press Edit, then Track, and when the sequencer enters Record/Overdub mode, adjust the
MIX value while the sequencer plays back. The volume changes you hear will be recorded as
MIXDOWN VOLUME events.
6) Press the Stop•Continue button, and press Play to listen to your newly recorded mix. If
your happy with the results, select KEEP= NEW on the Audition page, and then press
Enter•Yes to keep the results. The new MIXDOWN VOLUME events will now be
permanently recorded on the song track.
• Follow the same procedure to record MIXDOWN PAN events. At step 5 however, edit the
PAN value.
