Section 4 — Instrument, Bank, and Preset Parameters
Command/Instrument Page
11
• Press Load to return to the “Pile.” Pressing the number that you selected for the preset will
now instantly recall this keyboard configuration. Repeat this procedure for each performance
preset you want to create, selecting a new number (from 1-8) for each.
This function is labeled on the front panel as (Create Preset) under the Command button.
Note:
Performance presets are saved to disk only when you save the contents of memory as a bank.
When you load a bank, any presets that were present at the time the bank was saved will be
recreated.
CMD
DELETE INST EFFECT
INST
Press Command / Instrument / 6
This command deletes the Effect portion of an instrument. This is a handy “memory saver.” If
memory is tight and you’re using several instruments through a single BANK effect, deleting the
effect from each of the individual instruments in memory can free up enough memory to squeeze
in that final track. Deleting the effect from an instrument trims about three blocks from its size.
• Select the Instrument•Sequence Track that has the effect that you want to delete.
• Select DELETE INST EFFECT.
• Press Enter•Yes.
• The display shows COMMAND COMPLETED.
After performing this command, the instrument itself will contain no effect. However, the
instrument can still use the BANK or ROM effects.
