Section 11 — WaveSample and Layer Parameters
Edit/LFO Parameters
17
Edit/LFO Page
The parameters on this page control the Low Frequency Oscillator (LFO) that can be used to
create vibrato, tremolo and other effects. To access these parameters, press Edit then LFO.
EDIT
WAVE - RATE
LFO
Press Edit / LFO / 1 (for Wave) 2 (for Rate)
LFO Wave
Use this parameter to select one of the seven LFO waveforms:
• TRIANGLE — the triangle wave is commonly used to modulate pitch to produce vibrato.
• SINE/TRI — a mixture of a sine and triangle wave, a sort of pointy sine wave.
• SINEWAVE — the sine wave is a pure fundamental frequency, more rounded in its peaks and
valleys than the triangle wave.
• POS/TRI — the POS/TRI is a positive-only triangle wave useful for simulating vibrato on
instruments like the guitar, where vibrato techniques are limited to bending the note up.
• POS/SINE — the POS/SINE is a positive-only sine wave, similar in application to the
POS/TRI.
• SAWTOOTH — the sawtooth wave is commonly used for special effects.
• SQUARE — this positive-only square wave is useful for producing in-tune trill effects.
0
+100
-100
SQUARE
TRIANGLE
0
+100
-100
SINEWAVE
0
+100
-100
SINE/TRI
0
+100
-100
POS/SINE
+50
+100
0
POS/TRI
+50
+100
0
SAWTOOTH
0
+100
-100
