Docomo FOMA N901IC, Руководство пользователя, Страница: 97 / 596

95
Using the Phonebook
Continued on next page
<Add to UIM Phonebook>
Adding Information to the UIM Phonebook
1
Press
f
s
Press
1
“Add to phonebook”
s
Press
2
“UIM”
s
Enter the
name and press
d
.
The name can include kanji characters, hiragana, katakana, alphabetic letters, numbers
and symbols.
Names consisting of up to 10 full-pitch or 21 half-pitch characters (including some half-pitch
symbols) can be stored.
For information on entering text
→
P. 526
2
Check the reading and then press
d
.
■ If the reading is incorrect
Correct the reading using full-pitch katakana, alphabetic letters, numbers or symbols.
Up to 12 full-pitch or 25 half-pitch characters (including some half-pitch symbols) can be used.
“Reading search” in “Search phonebook” use the reading stored here.
3
Set the respective parameters and then press
o
“Finish”.
When phonebook editing was interrupted
1
Press
f
s
Press
1
“Add to phonebook”
s
Select
1
“Phone” or
2
“UIM”.
2
Select “Recall” and press
d
.
If a battery low alarm sounded during editing or you started up a new Tools group task using
Multi tasking, editing of the interrupted phonebook entry can be restarted.
When you are re-editing an entry, if you cancel editing without storing the changes, the data
being edited is erased.
■
To store a new entry
Select “New” and press
d
.
Group s Select a group and press
d
.
Selects a group number between “00” and “10”. If no group is selected, the entry is automatically assigned to group
00.
Phone number
s
Enter the phone number and press
d
.
Enters the phone number. Phone numbers up to 20 digits long can be stored on a blue UIM card or up to 26 digits
long on a green UIM card.
When storing the number for an ordinary phone, always begin by entering the area code, even when the contact is
in the same area.
Mail address s Enter the e-mail address and press
d
.
Enters the e-mail address. The e-mail address can contain up to 50 half-pitch alphabetic letters, numbers and
symbols.
Note
● If you enter the “ ヮ ” character (full-pitch, half-height) in a name, the reading will be displayed as “ ワ ” (full-pitch, full-height). However, you can also
enter the “ ヮ ” character (full-pitch, half-height) using reading input. Symbols are not represented in the reading.
● Include the correct domain name when storing e-mail addresses. The domain name is the part of the address that follows the “@” symbol.
E.g. docomo.taro.
△△ @docomo.ne.jp
● If the contact’s e-mail address is in the “[phone number]@docomo.ne.jp” format, store just the phone number as the e-mail address.
ＳｕｚｕｋｉＮａｏｋｏ
Ｅｄｉｔ ｎａｍｅ
Ｅｄｉｔｉｎｇ ｄａｔａ
ｅｘｉｓｔ
Ｒｅｃａｌｌ？
Ｎｅｗ
Ｒｅｃａｌｌ
Ｐｈｏｎｅｂｏｏｋ