Docomo FOMA N901IC, Руководство пользователя, Страница: 118 / 596

116
Tone/Displa
y/Lighting Settings
What is 3D Sound?
The 3D sound function is a function that uses the stereo speaker (or stereo earphone set) to produce a 3
dimensional and resonating sound. The 3D surround sound function allows you to enjoy i-
α
ppli-based games and
melody playback with richer and more realistic sound.
How to Listen to 3D Sound
● To enjoy 3D sound to the fullest, holding the FOMA terminal approximately 20 to 30 cm
in distance away from you and facing you will produce the best results. If the FOMA
terminal is facing to the right or left, or you are too close to it, you will not be able to
produce the best results.
●
Note that if you listen off-center or if you are too close or too far away from the FOMA,
the effect may be diminished.
● The 3D effect differs depending upon the individual. If 3D sound bothers you, set
“Surround”, “3DSound” and “SRS_WOW” (P. 117) all to “OFF”.
<Sound effect>
Sound Effects for Ring Tones and Melodies
Default settings Set surround: OFF; Set 3D sound: ON; SRS_WOW setting: OFF
Use this function to get a richer fuller sound when the FOMA terminal plays melodies, ring tones for incoming calls,
sound effects and i-motion sound.
1
Press
i64
s
Choose from the following options:
Note
● The volume at which the melody is played back during ring tone selection is determined by the “Phone” setting in “Ring volume”. If “Silent” is set, the
melody is not played back.
● Where the downloading of a melody, its use as an e-mail attachment or its transmission to devices other than FOMA terminals is prohibited, the
portion of the melody that can be played back may also be prescribed. When a melody of this sort is set as a ring tone, only the prescribed portion
is played.
● If you “Set as ring tone” in “Melody”, this setting is also set to the same ring tone. → P. 393
● If you “Set as ring tone” in “i - motion”, this setting is also set to the same ring tone. → P. 372
● Depending on the combination of receiving display, ring tone and precedence setting, either the receiving display or the ring tone may revert to the
default set at the time of purchase.
● You can use “Call setting w/o ID” to set a ring tone for voice calls where the caller does not provide a caller ID. The ring tone used for video-phone
calls where the caller does not provide a caller ID is determined by the “Video-phone” setting in this function.
● Priority is assigned as follows for call alert indicator operation when call/mail settings are duplicated (
q
has the highest priority):
q
Ring tone for phonebook utilities → P. 107
w
Ring tone for group utilities → P. 107
e
Ring tone for select ring tone (video-phone) → P. 114
r
Ring tone for call setting w/o ID → P. 154
t
Ring tone for select ring tone (except for video-phone) → P. 114
The phonebook utilities or group utilities’ priority order is as follows (
q
has the highest precedence):
q
i-motion ring tone
w
i-motion image
e
i-motion ring tone (an i-motion with no video, such as a singer’s voice)
● If an i - motion (video only) is set in the receiving display, 3D sound is set to OFF for the melody set as the ring tone.
● If you have activated “Call Waiting” when an i - motion is set as the ring tone, the ring tone used when you finish the current voice call is “Ring tone 1”
and not the i-motion.
1
Surround
s s s s
Select
1
“ON” or
2
“OFF”.
Sets natural 3-dimensional sound. The sound you are playing sounds like it is further away from the actual
position of the 2 speakers.