Docomo FOMA N901IC, Руководство пользователя, Страница: 498 / 596

496
Data Comm
unication
When this happens
●
Please check the following if you cannot connect to the net
-
work or dial-up successfully.
Uninstalling the FOMA PC setting software
This section describes uninstallation instructions for FOMA
PC setting software.
● To uninstall the “FOMA PC Setup Software” on Windows
2000 or Windows XP, you must do so from a user account
with Administrator privileges. If you attempt to uninstall the
software from another account, an error occurs. Contact
your PC’s manufacturer or Microsoft for information on how
to set Administrator privileges on your PC.
1
Before uninstalling.
Before starting the uninstallation process of the “
FOMA
PC 設定ソフト ” (FOMA PC setting software), the
various changes made for FOMA must be returned to
their original settings.
(1) To not reside the “W-TCP settings” in the
task tray.
Right-click the “W-TCP icon” in the task tray located
at the lower right corner of the desktop and select “
常駐させない ” (Nonresident).
(2) Exit any running program.
If you try to begin uninstallation while the “FOMA
PC setting software” or “W-TCP settings” is in
operation, the screen as shown below will appear.
Stop the uninstallation program and exit the
respective programs.
2
Start “ アプリケーションの追加と削
除 ” (Add and remove applications).
For Windows 98/Windows Me/Windows 2000
Click “ スタート ” (Start) → “ 設定 ” (Settings) →
“ コントロールパネル ” (Control Panel) →
“ アプリケーションの追加と削除 ” (Add/
deleting applications).
“
アプリケーションの追加と削除のプロパ
ティ ” (Property of Add and remove applications)
appears for Windows 98 and Windows Me.
For Windows XP
Click “ スタート ” (Start) → “ コントロールパネ
ル
” (Control Panel)
→
“
プログラムの追加と削
除 ” (Add or remove programs).
3
Select “
FOMA PC設定ソフト
”
(FOMA PC setting software) and click
“
変更と削除
” (Change and delete).
Problem Points to check
“FOMA
N901iC” is not
recognized
by the PC.
・
See if your PC satisfies the operational
environment required (P. 483).
・
See if the N901iC communication setting file has
been installed.
・
See if the FOMA terminal is connected to the PC
and the power is turned on.
・
See if the FOMA USB connection cable is firmly
connected.
・
See if the “USB mode setting” (P. 407) is set to
“Communication mode”.
Unable to
connect with
the access
point.
・
See if the settings for the ID (user name) and
password are correct.
・
See if the FOMA USB connection cable is firmly
connected.
・
If the access point requires the Caller ID, make
sure that “184” is not added to the phone
number.
・
See if the box of “
フロー制御を使う
” (Use
the flow control) of the modem property is
checked.
・
See if the APN is set correctly.
・
If you still cannot connect to the other end after
checking the above, consult with the Internet
service provider or network administrator about
the setting method.
Right-click
Click