Docomo FOMA N901IC, Руководство пользователя, Страница: 505 / 596

503
Continued on next page
Data Comm
unication
(3) Uncheck “
国/地域番号と市外局番を使う
”
(Use the Country/Region Code and Area Code).
(4) Click “OK”.
6
Enter the access point (APN) and
Press
.
Enter in the format of AT+CGDCONT=<cid>,
“PPP”,“APN”.
<cid>: Enter any number from 2 to 10.
Please be cautious because if cid has been already set,
the setting will be overridden.
“APN”: Put “ ” around the access point (APN) to
enter.
“PPP”: Enter “PPP” as it is.
If “OK” is displayed, the settings for the access point
(APN) are completed.
(Example: To enter APN named XXX.abc in cid
Number2)
Enter AT+CGDCONT=2,“PPP”,“XXX.abc”
.
7
Confirm that “OK” is displayed, open the
“
ファイル
” (File) menu and click “
ハイ
パーターミナルの終了
” (Close
Hyper terminal) to close the Hyper
terminal.
You will be asked “ セッション sampleを保存しま
すか
” (Do you want to save the session sample?)
However, there is no need to save it.
Specifying Caller ID
Default setting Set
● You can set whether to notify the other person of your caller
ID when “packet communication” is carried out. Since the
caller ID is important information, please take care when
you send your caller ID.
● You can set up the Notify or not notify Caller ID setting
using the AT command prior to a dial-up connection.
● Use the ＊ DGPIR command (P. 513) to notify or not notify
the caller ID or change back to “Not set” (Default value).
1
Start Hyper terminal.
2
Set up Notify (186) or Not notify (184) Caller ID
for packet communication.
Enter in the format of “AT ＊ DGPIR=<
n
>”.
To automatically attach 184 (Not notify) for dialing an
outgoing call/ answering an incoming call
Enter the following:
AT
＊
DGPIR=1
To automatically attach 186 (Notify) for dialing an
outgoing call/answering an incoming call
Enter the following:
AT ＊ DGPIR=2
Note
To reset the access point (APN) settings using the AT command
・ If reset, only the access point (APN) setting with cid=1 will
return to “mopera.ne.jp” (Default value), and cid=2 through 10
will be unregistered.
<How to enter>
AT+CGDCONT= (to reset all cid)
AT+CGDCONT=<cid> (to reset a certain cid only)
To confirm the access point (APN) setting using the AT
command
・ Display the current settings.
<How to enter>
AT+CGDCONT?
If entering the AT command displays nothing on the screen
<How to enter>
ATE1