Docomo FOMA N901IC, Руководство пользователя, Страница: 436 / 596

434
Other Useful Functions
*1 : The animation displayed for a “Schedule” or “ToDo” alarm differs depending on selected icon and category.
*2 : Operation for when “Alarm preferred” is set. When “Operation preferred” is set, the desktop icon
(Missed alarm) is displayed on the Standby
display.
● To stop the alarm tone
■
Alarm clock alarm tone
When “Snooze OFF” is set
Pressing any key stops the alarm tone and freezes the animation. If you press any key again, the release tone (”pipip”) sounds
and the display is cleared.
When “Snooze ON” is set
Pressing any key stops the alarm tone, freezes the animation and displays the “Snooze...” message. After the “Snooze...”
message has been displayed for around 5 minutes, the alarm is notified again. If you press
y
while the “Snooze...” message
is displayed, the release tone (”pipip”) sounds and the snooze setting is cancelled.
■
Schedule and ToDo alarm tones
Pressing any key stops the alarm tone, freezes the animation and displays the alarm message. Pressing any key again clears the
alarm message. However, if you pressed the side keys when the FOMA terminal was folded, the alarm notification display is not
cleared.
■
If you receive a call during alarm notification
Alarm notification stops and the FOMA terminal receives the call. The “Alarm clock” snooze setting is also cancelled.
i-mode or sending/receiving mail *
2
Alarm notification is the same as in the “Stand-by display shown”.
During infrared communication or
PIM function operation or data
transfer in OBEX No alarm notification is provided when the specified time is reached. When data communication ends, the
(Missed alarm) desktop icon appears in the Stand-by display shown.
→
P. 435
When an earphone/ microphone is
connected (”Earphone” set to
“Earphone”) The alarm tone sounds through the earphone for around 20 seconds. After 20 seconds, the alarm sounds
through both the earphone and the speaker. Animations appear on the display and in the indicator display.
When “PIN1 code entry set” is set to
“ON” and the PIN1 code entry
display is shown after the FOMA
terminal is turned on Alarm notification is the same as for the “Stand-by
display shown”. When the alarm notification display
clears, the PIN1 code entry display reappears. Alarm notification is provided after the correct PIN1
code is entered.
All lock or PIM lock set Regardless of the “Alarm setting”, no alarm notification
is provided when the specified time is reached. After
the All/PIM lock is released, the
(Missed alarm)
desktop icon appears in the stand-by display (P. 435).
If you turn the FOMA terminal off without releasing the
All/PIM lock and do not turn it back on before the
specified time is reached, no
(Missed alarm)
desktop icon appears in the stand-by display after the
All/PIM lock is released.
Regardless of the “Alarm setting”, no alarm notification
is provided when the specified time is reached. After
the All/PIM lock is released, the
(Missed alarm)
desktop icon appears in the stand-by display (P. 435).
Note
● If “Alarm clock”, “Schedule” or “ToDo” alarms are set for the same time, alarm priority is assigned as follows (
q
has the highest precedence):
q
Alarm clock
w
ToDo
e
Schedule
If alarm notification was not possible, the (Missed alarm) desktop icon appears in the stand-by display. However, if the FOMA terminal was
turned off, no (Missed alarm) desktop icon is displayed.
●
The volume of the “Schedule” and “ToDo” alarms is determined by the “Phone” setting in “Ring volume”.
●
The alarm volume during a call is the same as that specified in “Volume”.
●
The alarm volume while in original manner mode is the same as that specified in “Manner mode set”.
●
Unless “Phone” in “Vibrator” is set to “OFF”, the FOMA terminal uses both vibration and an alarm to notify you of alarms.
●
If “Display” in “Clock display” was set to “OFF”, or if the Schedule or ToDo entry was stored with “OFF” selected, no icon is displayed.
●
Before entering an area such as an aircraft or hospital where there is electronic equipment that uses extremely precise control systems or very low
signal levels and the use of mobile phones is prohibited, set the Auto power ON setting to “OFF” and then turn the FOMA terminal off.
Status
Function
Alarm clock Schedule or ToDo