Docomo FOMA N901IC, Руководство пользователя, Страница: 529 / 596

527
Entering T
ext
■ The number of characters remaining and the number entered
Characters shown in the Text Entry (Edit) display are counted according to the rules listed below. In each Text Entry (Edit)
display, the end mark (
) shows the end of the text that can be entered using the current function. Use the end mark as
an approximate guide to how many more characters you can enter.
●
When the number of characters is counted, each full-pitch character is counted as 2 bytes and each half-pitch
character is counted as 1 byte.
● Full-pitch character occupy twice as much space as half-pitch characters.
Full-pitch:
あいうえお
= 5 characters (counted as 10 bytes).
Half-pitch: ｱｲｳｴｵｶｷｸｹｺ = 10 characters (counted as 10 bytes).
■
Character combinations
Take care with character combinations when entering text.
<Example> Entering “
ﾄﾞｺﾓ
” in half-pitch kana input mode and “
の携帯電話
” in Kanji/hiragana input mode
●
The half-pitch dakuten “
ﾞ
” and “
ﾟ
” are each counted as 1 character.
Full-pitch characters are each counted as 2 half-pitch characters.
■ Scrolling
In the Text Entry (Edit) display, use
c
to scroll up and down one line at a time, and
s
(Memo/Check) and
a
(Home) to
scroll 1 page at a time.
In the candidates list display for kanji conversion, you can also use
c
to scroll up and down one line at a time, and
s
(Memo/Check) or
a
and
v
to scroll 1 page at a time.
Selecting the text entry method
The FOMA terminal provides 3 ways of entering text:
● Mode 1 (Kana input) → P. 528
Several characters are assigned to each key and the assigned character changes each time you press the key.
●
Mode 2 (2-touch input)
→
P. 529
Enters characters using 2-digit numbers.
●
Mode 3 (T9 input)
→
P. 530
Each time you press a key, the characters assigned to that key appear as a list of candidates from which you can select
the desired character.
1
Press
i35
s
Press
1
“Input mode”
s
Use
c
to select a checkbox
( □ ) and press
d
s
Press
o
(Finish).
Select at least 2 modes.
2
Select your preferred mode and press
d
.
A mode not selected in step (1) cannot be selected in this step.
●
Changing the text entry method while entering text
When the Text Entry (Edit) display is shown, your preferred text entry method is selected. There are 2 ways to switch
to a different text entry method. A change to the text entry method only applies to the current Text Entry (Edit)
display. When you exit text entry and then return to a Text Entry (Edit) display later, your preferred text entry method
will again be selected.
●
In displays used for entering (editing) specific text, such as postal codes, it may not be possible to change the text entry
method.
■
Changing from the Function menu
See “
6
CHG input method” in Text Entry (Edit) display Function menu 3/4 in “Using the function menu in the Text
Entry (Edit) display” → P. 541
■
Holding down
o
(Mode) for 1 second or longer
The text entry method changes to the next method each time you hold down
o
(Mode) for 1 second or longer,
in the following sequence: “Mode 1 (5-touch)”
→
“Mode 2 (2-touch)”
→
“Mode 3 (T9 input)”.
ﾄ ゛ｺ ﾓ の 携 帯 電 話 (9 characters when shown on the display)
1 1 1 1２ ２ ２ ２ ２ (count as 14 bytes, equivalent to 14 half-pitch characters)
̲ ̲ ̲ ̲ ＿ ＿ ＿ ＿ ＿