Docomo FOMA N901IC, Руководство пользователя, Страница: 501 / 596

499
Continued on next page
Data Comm
unication
1
After starting “FOMA PC setting
software”, click “
接続先（APN） 設
定
” (Set up Connecting destination
(APN)).
2
Click “OK” on the FOMA terminal
settings acquisition screen.
Automatically accesses the FOMA terminal connected
and reads the Connecting destination (APN) information
registered.
It does not start if no FOMA terminal is connected.
3
Set up the connecting destination (APN).
Adding/Editing/Removing the Access point (APN)
• To add an access point (APN)
Click “ 追加 ” (Add) on the “ 接続先 ( APN ) 設定 ” (Set up
Access point (APN)) screen.
• To edit a registered access point (APN)
Select the applicable access point (APN) from the list and
click “
編集 ” (Edit) on the “ 接続先 ( APN ) 設定 ” (Set up
Access point (APN)) screen.
• To delete a registered access point (APN)
Select the applicable access point (APN) from the list and
click “
削除
” (Delete) on the “
接続先
(
APN
)
設定
” (Set up
Access point (APN)) screen.
The access point (APN) registered in Number (cid) 1 cannot
be deleted.
Saving in File
If you want to back up the access point (APN) settings
registered on the FOMA terminal and/or save the access point
(APN) settings being edited, you can save the access point
(APN) settings by setting from the “
ファイル ” (File) menu of
the toolbar.
Reading from File
If you want to edit the saved access point (APN) settings and/
or write into the FOMA terminal, you can read the access point
(APN) settings saved on the PC by setting from the “
ファイ
ル
” (File) menu of the toolbar.
Writing Access point (APN) information into FOMA
terminal
Clicking “
FOMA端末へ設定を書き込む
” (Write settings
into FOMA terminal) on the “ 接続先 ( APN ) 設定 ” (Set up
Access point (APN)) allows you to write the displayed access
point (APN) settings into the FOMA terminal.
Dial-up creating function
Select the added/edited access point (APN) on the “
接続先
( APN ) 設定 ” (Set up Access point (APN)) screen and click “
ダイヤルアップ作成
” (Create dial-up).
When the screen for writing into the FOMA terminal appears,
click “
はい
” (Yes). After finishing writing into the access point
(APN), the “ パケット通信用ダイヤルアップの作成 ”
(Create dial-up for packet communication) appears.
Enter any connection name you want and click “
アカウン
ト・パスワードの設定
” (Set up Account/Password) (Not
needed for mopera).
Enter the user name and password (select an available user for
Windows 2000 or Windows XP) and click “OK”.
If your provider has given you instructions for setting IP and
DNS information, click “
詳細情報の設定
” (Enter detail
information) on the “ パケット通信用ダイヤルアップの
作成
” (Create dial-up for packet communication), register
necessary information and click “OK”.
After entering the settings, click “
FOMA 端末へ設定を書
き込む ” (Write the settings to the FOMA terminal), confirm
overwriting and start writing.
Setting up Dial-up Network
This section describes how to set up a dial-up connection
for packet communication/64K data communication
without using the FOMA PC setting software.
The procedure is as follows.
About AT commands
● AT commands are commands for modem control. The
FOMA terminal complies AT commands and supports
some enhanced commands and its own AT commands.
● Entering an AT command allows you to confirm (display)
the detail settings and the contents of the settings for the
“Data communication” and FOMA terminal.
Checking the COM port
● To Set up the access point (APN), you need to specify the
COM port number assigned to “FOMA N901iC” (Modem)
built in after installing the N901iC Communication setting
file. This section describes how to confirm the COM port
number. The COM port confirmed here will be used in the
access point (APN) set up (P. 502).
Access points <APN/cid>
● Normal telephone numbers are not used for access points
for packet communication unlike 64K data communication.
Set up APN (P. 502) instead of a telephone number for con-
nection.
●
The APN setting is just like registering a Phonebook for
packet communication from a PC. Assign registration num-