Docomo FOMA N901IC, Руководство пользователя, Страница: 55 / 596

53
Making/Receiving Phone Calls
Notifying/Withholding Your Caller ID For Individual Calls
If the other party’s phone supports caller ID display, you can provide your phone number (caller ID) for display on the
other party’s phone (display) when you make a voice or video-phone call. Note that your caller ID is important
information and care should be taken when providing it to others.
Adding the “186”/“184” prefix to the other party’s phone number
To provide your caller ID each time you make a call, add the “186” prefix when you dial the phone number. To
withhold your caller ID, use the “184” prefix.
■
To provide your phone number
Voice calls: 186 - (the other party’s phone number) -
r
Video-phone calls: 186 - (the other party’s phone number) -
e
■
To withhold your phone number
Voice calls: 184 - (the other party’s phone number) -
r
Video-phone calls: 184 - (the other party’s phone number) -
e
<Pause dial>
Sending Push Signals Quickly
By sending push signals from your FOMA terminal, you can send messages to QUICKCAST*, use services such as
ticket ordering and send bank balance requests.
*As of January 2001, the DoCoMo “Pocket Bell” pager service has been renamed as “QUICKCAST”.
Storing dialing data as pause dial record entries
You can store dialing data that you want to send as push data beforehand as a pause dial record entry. Inserting a
pause (p) allows you to send dial data with a pause.
● You can only store one dialing data entry, consisting of up to 128 characters.
● Dialing data can contain numbers from 0 to 9, the # and
*
symbols, and pauses (p).
●
You cannot enter pauses (p) in succession or at the beginning of the dialing data.
1
Press
i84
.
The “Pause dial display” appears.
■
If there is dialing data already stored
The stored dialing data appears.
2
Press
o
(Edit)
s
Enter the dialing data and press
d
.
Press
0
-
9
,
q
and
w
to enter the dialing data.
■
To enter a pause (p)
Hold down
w
for 1 second or longer.
Function Description Ref. page
Caller ID notification Specifies whether other parties are notified of your caller ID whenever you make a call. P. 45
184/186 Uses the 184 and 186 prefixes to specify whether your caller ID is provided or withheld
each time you make a call. P. 53
Notify caller ID Uses function menu to specify whether your caller ID is provided or withheld each time
you make a call. P. 49
Note
● The same effect can be achieved by dialing the “
*
31#” prefix instead of “186” and the “#31#” prefix instead of “184”.
● If you hear a message requesting your caller ID, dial the number again using the “186” or “
*
31#” prefix.
● If you make a call using the “186” or “184” prefix, the prefix is included in the number recorded in the Redial and Dialed calls records.
Pause dial display
Ｐａｕｓｅ ｄｉａｌ
Ｅｄｉｔ ＦＵＮＣ