Docomo FOMA N901IC, Руководство пользователя, Страница: 518 / 596

516
Data Comm
unication
AT+CPIN Enter the PIN code in the FOMA
terminal. Format: AT+CPIN=“<pin>”,“<newpin>”
This command is to enter the PIN1,
PIN2, or PUK code - depending on the
state of the result code returned when
AT+CPIN? is entered - of the FOMA
terminal. Even if PIN code entry or the
PUK code is requested on the screen,
depending on the state of the result
code when AT+CPIN? is entered, you
may not be able to use this command
to enter the PIN. Do not use this
command to change PIN code. Put
<pin> and <newpin> in “ ”.
AT+CPIN? result
+CPIN:READY:PIN1 code, PIN2 code
Cannot enter the PIN1 or PIN2 PUK code
+CPIN:SIM PIN:PIN1 entry standby
+CPIN:SIM PIN2:PIN2 entry standby
+CPIN:SIM PUK:PIN1 blocked
(Can enter PIN1 PUK code)
+CPIN:SIM PUK2:PIN2 blocked
(Can enter PIN2 PUK code)
The command shown on the right is an
entry sample of PIN code “1234” and
PUK code “12345678”.
(The status in which +CPIN:
READY is answered when
+CPIN? is entered)
AT+CPIN=“1234”
ERROR
(The status in which +CPIN:
READY is answered when
+CPIN? is entered)
AT+CPIN=“12345678”,“123
4”
ERROR
(The status in which +CPIN:
SIM PIN is answered when
+CPIN? is entered)
AT+CPIN=“1234”
OK
(The status in which +CPIN:
SIM PUK is answered when
+CPIN? is entered: PIN1
lock status)
AT+CPIN=“12345678”,
“1234”
OK
(The status in which +CPIN:
SIM PUK2 is answered
when +CPIN? is entered:
PIN2 lock status)
AT+CPIN=“12345678”,
“1234”
OK
AT+CPIN?
+CPIN:READY
OK
AT+CPIN=?
OK
AT+CR= n
[&F] [&W]
When the line is connected, display
the bearer service type before the
CONNECT result code is displayed. n =0 : Not display (initial value).
n =1 : Display.
<serv>: Display only “GPRS”, which means
packet communication.
(Displaying “SYNC”, “AV32K” or
“AV64K” depending on the line type.)
AT+CR?: Display the current setting.
AT+CR =1
OK
ATD
＊
99
＊＊＊
1#
+CR : GPRS
CONNECT
AT+CRC= n
[&F] [&W]
Set whether to use the extended
result code for the incoming call. n =0 : Not use +CRING (initial value).
n =1 : Use +CRING.<type>.
Format of +CRING:
+CRING: SYNC
+CRING: AV64K
: GPRS “PPP”,,,“<APN>”
AT+CRC?
: Display the current setting.
AT+CRC=0
OK
AT+CRC?
+CRC : 0
OK
(PPP over UD received)
+CRING: SYNC
(AV64K received)
+CRING: AV64K
(PPP packet received)
+CRING: GPRS
“PPP”,,,”<APN >”
AT command Outline Description of parameters
Command execution
example