Docomo FOMA N901IC, Руководство пользователя, Страница: 430 / 596

428
Other Useful Functions
<Multi access>
Multi Access
Multi Access is a function that allows voice calls, packet communication and SMS to be conducted at the same time.
This enables you to receive mail while you are talking to someone on the FOMA terminal or make a call while using
the i-mode services.
Communication lines that can be used concurrently
Using the Multi Access function, the FOMA terminal can concurrently use the 3 communication lines listed below.
When you receive a call during multi access communication
● i- mode mail received during a voice call
When you receive i-mode mail during a voice call, the voice call display remains on screen while the i-mode mail is
received. You can then read the i-mode mail without interrupting your call.
1 Hold down
u
for 1 second or longer.
The display changes to the i-mode mail reception results display.
■
To change displays from the Task menu
For information on using the Task menu to change displays → P. 432
2
Read the i-mode mail.
For information on reading i
-
mode mail
→
P. 276
3
Hold down
u
for 1 second or longer.
The display changes to the voice call display.
Type of communication Lines used
Voice call 1 line
i-mode, i-
α
ppli or i-mode mail 1 line for each
Packet communication with a connected PC
SMS 1 line
Note
● Communication charges apply for each of the lines used during multi access communication.
● While multi access cannot be used during a video-phone call, SMS can be received only.
● While multi access cannot be used during 64K data communication, SMS can be received only.
Note
● If you receive i
-
mode mail or a Message Request/Free during a voice call, the “Mail”, “Message Request” or “Message Free” icon flashes and then
lights without a ring tone to notify you of the received message.
● If “Alarm preferred” is selected in “Receiving display”, the icon flashes when you receive i
-
mode mail during a voice call and the display
changes to the “Receiving i-mode mail” display.
● If no operations are performed in the Reception Results display, the in-call display reappears. When this occurs, holding down
u
for 1 second or
longer does not switch back to the Reception Results display.
切替 ＦＵＮＣ
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
Ｍａｉｌ １０
Ｍｅｓｓａｇｅ Ｒｅｑｕｅｓｔ ２
Ｍｅｓｓａｇｅ Ｆｒｅｅ ０
Ｒｅｔｕｒｎ
Ｒｅｃｅｉｖｅｄ ｒｅｓｕｌｔ
Ｓｅｌｅｃｔ