Docomo FOMA N901IC, Руководство пользователя, Страница: 493 / 596

491
Continued on next page
Data Comm
unication
Enter the connection name correctly including upper/
lower case.
You cannot use the following reserved characters;
¥/:
＊ ?!<>|” (half-pitch only).
6
Specify a user name and password, then
click “
次へ ” (Next).
User Name and Password can be omitted for the mopera
connection.
Select the user for Windows 2000/Windows XP.
If you are not sure which user to select, choose “
すべて
のユーザー ”(All users) (default setting).
Enter exact information provided by the provider
including upper / lower case to enter the User Name/
Password.
7
Check “ 最適化を行う ” (Optimize the
setting) and click “ 次へ ” (Next).
Optimize “
W-TCP 設定
” (W-TCP settings) required for
“packet communication”. If they are already optimized,
this screen will not be displayed.
8
Check the setting information and click “
完了
” (Finish).
The contents that were set will be listed.
Make sure that all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する
” (Add dial-up shortcut
on desktop automatically creates a shortcut icon.
To change any setting, click “
戻る
” (Back).
9
Click “OK”.
You need to reboot the PC to enable the changes in the
settings.
Click “
はい ” (Yes) if the selection screen for reboot
appears.
Performs the communication set up (P. 494).
Easy settings: “Specifying Packet communication
settings using other providers”
1
Click “
かんたん設定
” (Easy settings).
2
Select “ パケット通信 ” (Packet
communication) and click
“ 次へ ” (Next).
3
Select “ その他 ” (Other) and click “ 次
へ ” (Next).
4
Click “OK”.
Please wait for a few minutes while the APN setting
information is being acquired from the FOMA terminal
connected to the PC.
5
Specify the packet communication
settings.
After the terminal setting has been completely acquired,
the screen “
パケット通信設定
” (Packet
communication setting) will appear.
Enter a name in “
接続名 ” (Connection name).
Enter the connection name correctly including upper/
lower case.
The following reserved characters cannot be used for
接
続名 (Connection name);
¥/:
＊
?!<>|” (half-pitch only).
If “
発信者番号通知を行う
” (Notify Caller ID) is
checked off, the Caller ID is notified when communication
is carried out.
APN: mopera.ne.jp is set by default in the “
接続先
（APN)の選択
” (Select the connecting destination
(APN)) for mopera connection.
（ Windows 2000 、 Windows XP ）