Docomo FOMA N901IC, Руководство пользователя, Страница: 136 / 596

134
Tone/Displa
y/Lighting Settings
1
Press
2
“Speed”
s
Choose from the following options:
*: This setting may be not applicable depending on an i-
α
ppli.
<Illumination>
Setting the Call Alert Indicator Flashing Mode for Incoming Calls
Default settings Phone: Color 5 Video-phone: Color 5 Mail: Color 1 Chat mail: Color 3
Message Request: Color 1 Message Free: Color 1 Set pattern: Standard Color name:
Color 1-12
Use this procedure to set the color and pattern (flashing pattern) in which the call alert indicator flashes when you
receive voice or video-phone calls, mail, chat mail and Message Request/Free.
The table below lists the available settings.
●
You can set different flashing colors respectively for incoming calls and messages from specific phone numbers, e-mail
addresses and groups.
→ P. 107
● The flashing pattern for
o
and
p
is the same as that set for the call alert indicator except that they flash orange.
1
Press
i89
s
Choose from the following options:
1
Simple
s
Selects
1
“Normal” or
2
“High”
s
Select “YES” and press
d
.
Choose from 2 speed settings.
2
Detail
s
Choose from the following options:
Set the speed settings for each display.
1
Standard
s
Use
c
to select “FIRST”, “LOW” or “HIGH”
s s s s
Use
v
to
adjust the speed
s s s s
Select “OK”.
The speed can be adjusted from level 0 (left end) to level 11 (right end). Move
the key to the right to increase the speed and to the left to decrease the speed.
2
MainMenu
3
T9/Prediction
4
Software*
3
Reset
s
Select “YES” and press
d
.
1
Set color
s
Choose from the following options:
Select the color pattern.
The selected color pattern appears on the display during selection.
1
Phone
s
Select a color and press
d
.
Selects the flashing color respectively.
Color 1 to 12: Each color blinks.
Gradation: The color 1 to 12 blinks in order.
2
Video-phone
3
Mail
4
Chat mail
5
Message Request
6
Message Free
2
Set pattern
s
Choose from the following options:
Select the call alert indicator flashing pattern.
1
Standard Sets the standard flashing pattern.
2
Melody linkage Sets a melody-linked flashing pattern.
If flashing mode is not set to the melody or Chaku-motion is received, flashing
with the standard pattern.
3
Adjust color
s
Choose from the following options:
Set the color.
1
Edit color name
s
Select the color and press
d
s
Enter the color name and
then press
d
.
The color name can contain up to 10 full-pitch or 20 half-pitch.
See “Entering Text”
→
P. 526
2
Adjust color tone
s s
s s
Select the color and press
d
s s
s s
Use
b
to adjust the
color tone.