Docomo FOMA N901IC, Руководство пользователя, Страница: 79 / 596

77
Making/Receiving Video-phone
Calls
Continued on next page
Making a Video-phone Call
● Video-phone calls can also be made using the DoCoMo “WORLD CALL” international telephone service. → P. 55
1
Dial the phone number starting with the other party’s area code.
The “Video-phone number input display” appears.
Always start by entering the area code, even for calls within the same area.
■
To call a mobile phone
090-xxxx-xxxx
or
080-xxxx-xxxx
■
To call a PHS phone
070-xxxx-xxxx
2
Press
e
s
When the video-
phone connection is established,
press
o
( ) to switch to
hands-free mode.
The “Video-phone in-call display” appears.
Because the other party’s voice can be heard by
people around you in hands-free mode, you should
move to a location where your call will not disturb
other people before switching to hands-free mode.
See “Using the hands-free operation”
→ P. 60
■
To send video from the rear camera
Press
d
.
Each time you press
d
, the video switches between the front and rear cameras (CHG camera-mode).
■ To put the current video-phone call on hold
Press
t
.
The other party hears the hold tone and the “Holding” image appears on his or her video-phone display. To release a
held video-phone call, press
e
(answers the held video-phone call using the camera image) or
t
,
r
(answers the held video-phone call using the alternate image).
■
If you use an earphone/microphone with switch (optional)
You do not need to switch to hands-free mode. You can hear the other party’s voice through the earphone.
■ If the video-phone call was not connected → P. 80
3
To end the call, press
y
.
− − Area code Local code Phone number
Video-phone number input display
Ｄｉａｌ Ｓｔｏｒｅ ＦＵＮＣ
４ｓ
１２：０５
Video-phone in-call display
１０ｓ
１２：０５
Ｃｈａｎｇｅ ＦＵＮＣ
The charge of digital communications
starts from this screen.