27
Before Using D903i
3
Press
p
・
When
Change image
is set to
Speed selector
in Random Display Image, if you set
Use at stand-by disp
to
other than
OFF
, a confirmation screen appears asking whether to enable this setting. When you select
Yes
, Random Display Image is canceled and the default standby display appears.
INFORMATION
●
Even if
Speed selector
is set to
OFF
, some i-
α
ppli may be operated by rotating the Speed Selector. And even when
Speed
selector
is set to
ON
and
Speed selector
in Settings (for i-
α
ppli) is set to other than
OFF
, some i-
α
ppli cannot be operated
by rotating the Speed Selector.
●
When adjusting the volume, zooming in and out on the shooting screen, PDF Viewer or Document Viewer, or increasing
and decreasing values, the setting for
Direction
is disabled. In this case, rotating the Speed Selector to the right
increases the volume/display magnification/value and rotating to the left decreases it. In addition, the setting for
Direction
is disabled for some i-
α
ppli.
Reading the display
The description of icons displayed at the top or the bottom of the display is shown below:
a
:
Battery level icon
☛
P42
b
:
Signal level icon
☛
P43
:
Out of service area
☛
P43
:
Self Mode is set
☛
P156
:
During data transfer
☛
P332, P348
DoCoMo keitai datalink in progress
☛
P414
c
:
In i-mode communication (during
i-mode connection)
☛
P188
:
In i-mode communication (during
packet communication)
☛
P203, P228
d
:
During infrared communication
☛
P348
Infrared remote control function in
operation
☛
P352
:
Key Lock is set (in gray when Key Lock
is temporarily released)
☛
P160
:
Total call cost exceeds the maximum
limit
☛
P395
e
:
Speakerphone function in operation
☛
P51
:
Connecting to handsfree compatible
device
☛
P64
f
:
Accessing the phonebook on the
network (PushTalkPlus)
☛
P90
:
During PushTalk calls
☛
P90
:
i-mode Mail and Message R/F storage
space is full in the Center*
2
☛
P229, P203
/
/
:
i-mode Mail or Message R/F storage
space is full in the Center
:
Both i-mode Mail and Message R/F exist
unreceived in the Center
/
/
:
i-mode Mail or Message R/F exists
unreceived in the Center
g
:
Unread i-mode Mail and/or SMS fills
storage space and also SMS storage
space is full on UIM
☛
P256
:
Unread i-mode Mail and/or SMS fills
storage space
☛
P229, P256
:
SMS full on UIM
☛
P256
:
Unread i-mode Mail and SMS exist
☛
P228, P255
Use at stand-by disp
:
Select the function to be executed when the Speed Selector is rotated on the standby display.
・
When
Menu
is set, the menu appears.
・
When
Phonebook
is set, the phonebook list appears.
・
When
Scheduler
is set, the calendar screen of Scheduler appears.
a
-
m
Date, day
of the week
and time
n
o
-
z
Received i-channel information
☛
P212
*1
*1
*1
*1
Next
▲