29
Disconnection reason list
■
Packet communication
■
64K data communication
Error messages list
Supplement to AT command
■
Command name: AT+CGDCONT= [parameter]
Sets the dialup connection (APN) for packet
communication.
Format
AT+CGDCONT=[<cid>[, “PPP” [, “<APN>”]]]
Parameter description
<cid>: 1 to 10
“mopera.ne.jp” is registered in cid 1, and
“mopera.net” in cid 3.
<APN>: Optional
Example of execution
The command used to register an APN named
“abc” (when <cid>=2).
AT+CGDCONT=2, “PPP”, “abc”
Operation performed when parameter is omitted
AT+CGDCONT=
Clears all <cid> settings. However, entry for
“<cid>=1” and “<cid>=3” is restored to the
default setting.
AT+CGDCONT=<cid>
Clears the specified <cid> settings. However,
entry for “<cid>=1” and “<cid>=3” is restored to
the default setting.
AT+CGDCONT=
?
Displays a list of assignable values.
AT+CGDCONT
?
Displays the current setting values.
■
Command name: AT+CGEQMIN= [parameter]
Registers the criteria for judging whether to
approve QoS provisioned by the network when
PPP packet communication is established.
Format
AT+CGEQMIN= [<cid>[,,<Maximum bitrate
UL>[,<Maximum bitrate DL>]]]
Parameter description
<cid>
:
1 to 10
“mopera.ne.jp” is registered in cid 1,
“mopera.net” in cid 3.
<Maximum bitrate UL>: None or 64
<Maximum bitrate DL>: None or 384
For “Maximum bitrate UL” and “Maximum bitrate
DL”, the minimum communication speed (in
kbps) is set for both upload and download traffic
between FOMA terminal and the base station. If
the parameter is set to “None (default)”, all
speeds are permissible. However, if “64” and
“384” are set, any connection at a speed less
than the above limit is not permitted, and
chances are that packet communication will not
be connected.
Example of execution
(1) Command used to permit all speeds both
upload and download (when <cid>=2)
AT+CGEQMIN=2
(2) Command used to permit only 64kbps upload
and 384 kbps download (when <cid>=4)
AT+CGEQMIN=4,,64,384
(3) Command used to permit 64 kbps upload and
all speeds download (when <cid>=5)
AT+CGEQMIN=5,,64
(4) Command used to permit all speeds upload
and only 384 kbps download (when <cid>=6)
AT+CGEQMIN=6,,,384
Value
Reason
27
APN is not present or is incorrect.
30
Disconnected by network.
33
Terminal is not subscribed to packet
communication.
36
Normal disconnection
Value
Reason
1
Specified number does not exist.
16
Normal disconnection
17
Communication is impossible because remote
device is busy.
18
You made a call but did not receive a response
within the specified time.
19
A call was made to the other party, but no
response.
21
The remote device rejected incoming calls.
63
The service and option of the network are not valid.
65
Unavailable processing speed was specified.
88
You made a call to a terminal or received a call
from a terminal with different terminal properties.
No.
Text display
Reason
10
SIM not
inserted
No UIM (FOMA card) is set.
15
SIM
wrong
A SIM other than UIM (IC card
equivalent to UIM) is inserted.
16
incorrect
password
Incorrect password
100
unknown
Unknown error
Next
▲
D903i Manual for Data Commu.fm 29 ページ 2006年10月12日 木曜日 午後5時45分