288
Osaifu-Keitai/ToruCa
Specifying whether to use auto reading function
ToruCa Auto-read
Auto reading function moves the ToruCa to the
Used
ToruCa
folder automatically when you attempt to get
it by holding your FOMA terminal over the reader/
writer in a store, etc. This function is activated when
the ToruCa was certified issued before by the issuer
of the ToruCa and already saved in FOMA terminal.
･
When
OFF
is set, there may be the case that
ToruCa cannot be used.
･
Up to 20 items can be saved in
Used ToruCa
folder. When the number exceeds 20, the oldest
one is deleted chronologically.
1
m8523
A confirmation screen for ToruCa Auto-read
appears.
2
Check the settings
z
o
z
Press
1
or
2
Menu 642 / Menu 83131
Preventing use of IC card functions
IC Card Lock
IC Card Lock disables use of the IC card by
holding the FeliCa mark over a reader/writer. It
also disables acquisition of ToruCa and download
of Osaifu-Keitai compatible i-
α
ppli.
･
IC Card Lock cannot be set when All Lock is
active. To set both IC Card Lock and All Lock, first
set IC Card Lock and then set All Lock.
1
r
(for over a second)
z
Select
Yes
IC Card Lock is set and
appears on the
standby display.
･
When
Voice
+
SecurityCode
is set as the procedure
for canceling IC Card Lock, and voice keyword for
authentication is recorded, voiceprint
authentication is needed for canceling IC Card
Lock.
･
For voiceprint authentication, please take the
following precautions:
･
Hold the terminal in the same way as when you
were recording. (In the same way as you speak
over the phone, hold the terminal beside your
face, or 5cm away from the front of your face.)
･
A voice is hard to be recognized in the cases
that circumference is noisy.
･
A voice is hard to be recognized when using a
flat type earphone/microphone set with
switch(optional), etc.
1
r
(for over a second)
After about 2 seconds, a beep is heard and
recording starts.
･
When
Security code
is set for the procedure to
cancel IC Card Lock, go to Step 3.
2
Say the authentication keyword within 5
seconds
When the keyword is authenticated, the terminal
security code entry screen appears.
･
To stop the authentication:
o
･
When there is a noise around,
Please try again
to verify voiceprint in quiet place
. is displayed.
Press
o
and say the keyword again.
･
If the keyword was not authenticated, the
message appears. Press
o
and say the
keyword again.
･
Pressing
C
for over a second, without
voiceprint authentication operation, displays
the terminal security code entry screen.
3
Enter the terminal security code
Default
OFF
Default
OFF
Canceling
･
Say the keyword
which was set in IC
Card Lock Setting.
