31
■
Communication protocol result code
■
Display example of result codes
When “ATX 0” is set
Regardless of the settings of the AT
¥
V command
(
☛
P28), only
CONNECT
is displayed upon
completion of connection.
When “ATX 1” is set
・
When “ATX1”, “AT
¥
V0” is set (default)
Upon completion of connection, the result code
is displayed in the following format: CONNECT
<speed between FOMA terminal and PC>
Text display example:
ATD
*
99
***
3#
CONNECT 460800 (“1 21” in numeric
display)
・
When “ATX1”, “AT
¥
V1” is set*
1
The code is displayed upon completion of
connection as follows:
*1 When “ATX1” and “AT
¥
V1” are set at the
same time, it is likely that dialup connection
will fail.
It is recommended that this function be
usually set to default, which is “ATX1” or “AT
¥
V0”.
No. Text display
Meaning
1
PPPoverUD
Connected via 64K data
communication
2
AV32K
AV (videophone) connected via
[32K]
3
AV64K
AV (videophone) connected via
[64K]
5
PACKET
Connected with packet
communication
Text display example:
ATD
*
99
***
3#
CONNECT (“1” in numeric display)
Text display example:
ATD
*
99
***
3#
CONNECT 460800 PACKET mopera.net/
64/384 (“1 21 5” in numeric display)
Indicates that speed between FOMA terminal
and PC is 460,800 bps and the terminal is
connected to mopera.net providing a maximum
upload speed of 64 kbps and a maximum
download speed of 384 kbps.
D903i Manual for Data Commu.fm 31 ページ 2006年10月12日 木曜日 午後5時45分