380
Other Convenient Functions
INFORMATION
●
Even if Auto Power OFF is set to
ON
, when the specified
time arrives while FOMA terminal is in any mode except
standby, the power is not turned off. The power is turned
off after the running function completes each job.
However, if the specified time arrives while the terminal
security code entry screen is displayed following the
standby display or the PIN1 code or PIN2 code entry
screen is displayed when FOMA terminal is turned on,
the power is turned off.
●
Set Auto Power ON to
OFF
in areas where mobile phone
use is prohibited, such as in hospitals, medical facilities
and airplanes.
Alerting with alarms after the specified
time period has passed
Timer
1
Enter time period
z
r
or
m1
The countdown screen of the timer appears and
countdown starts.
･
Enter the period from 1 to 60 minutes. For 1 to
9 minutes, do not enter the preceding 0.
･
Countdown continues even if a call or PushTalk
call arrives or
b
is pressed to start another
function during countdown.
･
If you press
c
or
f
during countdown, a
confirmation screen appears asking whether to
stop countdown. Countdown continues even
while the confirmation screen is displayed.
After the specified time has passed
1
The alarm sounds
2
Press
f
to stop the alarm
The standby display reappears.
･
The alarm stops when a minute has passed
without any operation or any key or button
other than
f
is pressed.
*1 Receiving/sending by packet communication is excluded.
Ringing the alarm clock at the set time
Alarm Clock
Setting the alarm clock time and sound
･
When Alarm Clock is on, the default settings are
as follows;
Time: 00:00, Repeat: None, Snooze: ON
Alarm sound: Terminal setting, Volume: Terminal
setting, Vibrate alert: Terminal setting, Light
pattern: Terminal setting, Light color: Terminal
setting.
･
Up to 9 alarms can be set.
1
m73
z
1
to
9
･
is displayed on left of a title while setting
an alarm.
■
Canceling: Highlight the title from the
alarm clock list
z
m
･
To set the canceled alarm again: Highlight a
title from the alarm clock list
z
m
2
Select each item to set
The alarm (
アラーム・メ
ロディ
(Alarm, melody))
sounds at the volume set
for the call alert volume,
and the Enter key flashes.
If the vibrator is set for
incoming calls in Vibrator
Setting, it operates
according to the setting.
Alarm indication while another function is
being used
Function
Alarm indication
During a call or
PushTalk call
A warning tone sounds. The Enter
key does not flash and the vibrator
does not vibrate. In case of a
PushTalk call during floor
acquisition, the floor acquisition is
not released to enable you to talk.
On-hold
The above operation takes place
after the end of the on-hold state.
During data
transfer*
1
, while a
call or PushTalk call
is ringing or being
dialed, received or
terminated
The alarm is issued after the end
of the left-mentioned operation.
･
If the schedule data is received via
data communication, the schedule
does not operate when the
scheduled date and times comes.
Default
not set
Time
：
Enter the time to set an alarm.
Repeat
：
Select the repeat setting.
･
If
None
is set, the alarm is activated only
once.
･
If
Every day
is set, the alarm is activated
everyday.