71
Calls/Videophone Calls
Setting the priority screen for incoming calls during a call or packet communication
Priority Comm Mode
Set the priority of the screen to be displayed when you receive a packet communication through a
connected PC during a voice call or you receive a voice call during i-mode.
･
When there is incoming i-mode packet communication during a voice call, the voice call talking screen
appears by priority regardless of this setting.
･
The screen change caused by this function does not interrupt the call or packet communication.
1
m8461
2
Press any of
1
to
3
No Set Up
：
Displays the screen for the latest incoming call/communication without setting the priority.
Voice call
：
Displays the voice call talking screen by priority.
Packet
：
Displays the packet communication screen during a voice call, and the i-mode communication
screen during i-mode.
･
Press
b
to display the
Switch Task
menu then answer an incoming call.
When you can or could not answer a call/videophone call
Putting incoming calls on hold when you cannot answer right away
Response and Hold
･
Callers are charged for the time spent on hold.
1
f
while receiving a call
2
Press
n
when you are ready to answer the call
･
Press
t
or
n
for a videophone call. Press
a
to send the substitute image (
☛
P86) to the other
party.
･
If
f
is pressed or the other party hangs up during Response and Hold, the call is ended.
INFORMATION
●
When you have subscribed to Voice Mail Service or Call Forwarding Service, you can use the service by pressing
m
and selecting
Voice Mail
(
V-phone answerphone
for videophone call) or
Call Forwarding
while receiving a call.
Default
No Set Up
Incoming voice
call on hold
Incoming videophone
call on hold
The incoming call is put on hold (Response and
Hold). The other party hears the response hold
guidance.
For videophone calls, the response hold image
appears on your and the other party’s terminals.
