296
GPS Function
･
How to use the location information differs
depending on i-
α
ppli.
1
m692
z
Select i-
α
ppli
The software is started.
INFORMATION
●
When you use a GPS-compatible i-
α
ppli application, the
location information is sent to the information provider of
i-
α
ppli.
●
To use the GPS function with an GPS-compatible i-
α
ppli
application, set
Location usage setting
to
Yes
in the
settings for that i-
α
ppli.
●
In the case where NAVITIME for D903i registered by
default has been deleted, you can download it from the
i-mode site “My D-style”
☛
P444
Providing the current location information
in response to a request
Location Request
Perform positioning of the current location and
send the location information in response to a
request from a GPS service provider supporting
the Location Request function.
･
Using this function may sometimes require you to
make an application with the service provider in
advance. Note that you must sometimes pay for
the service.
･
Using this function requires you to set Request
Permit/Deny to
Always permit
or
Permission
schedule
in advance.
☛
P297
･
GPS Service Setting in the Location Request
setting may be required depending on the service
you use.
☛
P298
･
When you use imadoco-search, you do not need
to set the service usage settings on your FOMA
terminal, but you need to set
イマドコサーチ設定
(imadoco-search setting) in the iMenu settings
(
料金＆お申込
・
設定
→
オプション設定
→
位置情
報利用設定
). For details about the imadoco-
search setting, visit the DoCoMo website.
･
When using the Location Request function, you
should follow what the service provider or
DoCoMo website says.
When you are requested to notify your location
The screen or operation indicating that a location
request arrives differs depending on the settings for
each GPS service.
■
If
許可
(Permit) is selected for individual GPS
services
The start notice screen appears, and without
asking you to confirm, the positioning starts
automatically. If you press
o
or when
approximately 5 seconds passes, the positioning-
in-progress screen appears.
Upon completion of positioning, the location
information is automatically sent and the result
screen appears.
■
If
毎回確認
(Confirm each time) is selected for
individual GPS services
A confirmation screen appears. Select
Yes
to send
the location information or select
No
to cancel.
･
If, after the confirmation screen appears, you do
nothing for approximately 20 seconds, the
Location Request function is stopped.
Upon completion of positioning, the location
information is automatically sent and the result
screen appears.
■
Operation in response to a location request
(common to
許可
(Permit) and
毎回確認
(Confirm each time))
･
When a location request comes, FOMA terminal
sounds and vibrates and the Enter key lights or
flashes according to the settings of Positioning
Alert of Location Request.
☛
P302
･
To cancel the location request during positioning,
press
c
. However, the location information
may be sent depending on the timing of cancel.
Also, depending on the recipient, positioning
cannot be canceled.
