Docomo FOMA D903i, Руководство пользователя

Страница: 306 / 537

303 GPS Function
Setting the positioning alert used with
the Position Location function
1
m6943
■
Setting the positioning alert used with the
Location Request function:
m6965 z 1
or
2
■
Setting the positioning alert used with the
Notify Location function:
m695
23
2
Select each item to set
z p
INFORMATION
●
Even if you set sound and vibration alerts, they will not
work when you retry positioning from the positioning
result of Position Location.
●
The sound or vibration for the GPS function will not work
while a voice call/videophone call/PushTalk call is being
originated, communicated, or received. While such a call
is being originated or communicated, you hear rapid
beeps from the earpiece.
Using the GPS function
■ Using the GPS function
･
Using the GPS function may require you to
make an i-mode subscription.
■ About the positioning function
･
The GPS is operated by the Department of
Defense of the United States, which suggests
that for reasons of U.S. defense, the conditions
of radio waves used for the GPS may get under
control to the extent that such radio waves will
be degraded or stopped.
･
Because the GPS uses radio waves from
satellites, it may fail to receive them or will
hardly receive them under any of the following
conditions:
･
Inside a building or immediately below it
･
In a basement, in a tunnel, in the ground or in
water
･
In a bag or box
･
On a street lined with large buildings or in a
residential area
･
In or under thick trees
･
Nearby a high-voltage cable
･
In an automobile or train car
･
Bad weather such as heavy rain or snow
･
When there is someone or something that
blocks your mobile phone
･
When you hold your mobile phone so that your
hand covers its screen, keyboard, microphone
or speaker
If such a condition occurs, the location information
you get may have an error of 300m or above.
･
There are some 24 GPS satellites in an orbit at
an altitude of 20,000 km and each of them
rotates around the Earth in approximately 12
hours. Even in the same working environment,
therefore, the conditions of radio waves
received may vary from time to time, with the
result that the location information obtained may
show a significant error or the positioning
operation itself may fail.
■ Using the GPS function together with other
functions or during lock
･
The Position Location, Location Request and
Notify Location functions of GPS are unavailable
in the following cases:
･
During All Lock* 1
･
In Omakase Lock (Remote Lock)*
1
･
During PIM Lock* 1
･
In Self Mode
･
During infrared or iC communication
Ring alert ：
Select
Melody
to set a ring alert.
･
Playing and checking a melody
☛
P120
Vibrate alert ：
Set the vibration.
Ring time (sec)
：
Set the time during which a sound is to be
sounded (0 to 20 seconds for Location
Request; 0 to 30 seconds for others).
Light alert ：
Set the lighting pattern and color of the
Enter key.
･
Sync melody
cannot be selected. Also,
OFF cannot be selected for Location
Request.
Example
Next
▲