157
Safety Settings
・
The following operations (the whole operation or part of the setting) become unavailable.
*1 Messages can be received but the receiving screen, the icon for the received mail and the reception result
screen are not displayed and the ring alert does not sound. In addition, the mail cannot be composed by
using logs of incoming/outgoing messages.
*2 The operation when Location Request is received and sending the location information are available.
*3 Can be received, but it is not displayed on the incoming screen. When PIM Lock is canceled, it is
displayed in the received call list.
・
Even if a call or PushTalk call is made/received to/from a caller registered in the phonebook, only
phone number is displayed instead of the name and image.
・
Even though the details of logs of incoming/outgoing messages are displayed, the name or image of
the other party registered in the phonebook is not displayed and the mail address appears.
・
is not indicated on the standby display because Answer Machine does not operate even when Answer
Machine is set. An icon for a recorded message which has not been played is not displayed either.
・
The i-channel information is not displayed as ticker on the standby display.
INFORMATION
●
When the data which is subject to PIM Lock has been set for the standby display or the ring alert, the default setting is
applied while PIM Lock is on (In case
Normal
is set to
Same as Kisekae
in Menu Setting,
Tile display
is applied). The
setting you made is restored when PIM Lock is canceled. However, when data saved in the
Preinstalled
folder is set, the
set standby display or ring alert is used even if PIM Lock is on.
●
With PIM Lock on,
Default image
(camera-off image) appears as the substitute image for videophone.
●
When PIM Lock is on, Machi-chara is not displayed. When PIM Lock is canceled, it reappears.
●
When PIM Lock is on, the notification such as by alert tone is not made when the number of voice messages of Voice
Mail Service is increased.
Prohibiting keypad dial
Keypad Dial Lock
Disables making a call or PushTalk call by dialing a phone number (Keypad dial).
・
You can make a call using the phonebook/PushTalk phonebook.
1
m8314
When PIM Lock is on
・
Mail/Chat Mail/SMS/Message R/F*
1
・
Check i-mode Message
・
i-mode/Full Browser
・
i-channel
・
i-
α
ppli
・
Phonebook/PushTalk phonebook
・
Answer Machine/Voice Memo
・
Data Box (
My Picture
,
Melody
, etc.)
・
Data transfer reception via infrared communication/iC communication
・
Bar Code Reader/Camera/Sound Recorder/Music Player
・
ToruCa
・
IC card list
・
microSD
・
Data Security Service
・
GPS*
2
・
Scheduler
・
Notepad
・
Alarm Clock
・
Call Ring Alert, Mail/Msg Ring Alert/GPS Alert/Alarm sound/Slide Sound
・
Anonymous Caller
・
Standby Display Setting
・
i-Channel Ticker
・
Mail/Call Image(except for Contact Image)
・
Mail Image
・
Call Image Setting
・
Machi-chara Setting
・
Virus Scan Function
・
Outgoing Call/Videophone Dialing
・
Call Alert/Videophone Alert
・
Reject/Accept Call
・
Headset Key Control
・
PushTalk Alert
・
Software Update
・
Call Cost Limit
・
Reset
・
Delete All Data
・
Tone/Vibration Message Notification
・
Number Setting/Incoming settings for Multi Number
・
Own Number
・
Chaku-moji*
3
・
Speed menu
・
Menu Setting
Default
OFF
Next
▲