474
Appendix/Data Interchange/Troubleshooting
･
Repair of failures or damage caused by
modification are charged even during the
warranty period.
･
Do not remove any inscription stickers attached
to your FOMA terminal.
The inscription stickers certify that the FOMA
terminal satisfies specific technical standards.
Note that if stickers are removed intentionally or
are reattached in such a way that confirmation
of the sticker’s contents is impossible, repair or
servicing may be refused because confirmation
of whether or not the phone conforms to
relevant technical standards cannot be made.
･
The function settings, the information of total
calls duration, etc. may be cleared (reset) by
failure, repair or other handling processes.
Should this happen, set up the functions again.
･
Magnetic components are used in the earpiece
and speaker of the FOMA terminal. Do not allow
cash cards or other devices that are vulnerable to
magnetism to come into contact with the phone.
･
If your FOMA terminal becomes wet or moist,
turn the power off and remove the battery pack
immediately and bring it to a repair office as soon
as possible. However, repair may not be possible
depending on the condition of your FOMA
terminal.
■
Phonebook data or downloaded data
･
Maintain a separate record of the data you
register in your FOMA terminal. DoCoMo will not
accept any liability and responsibility
whatsoever for changes or loss of information.
･
Data created, imported or downloaded by the
subscriber may become corrupted or be lost
when changing the model or repairing FOMA
terminal. DoCoMo will not accept any
responsibility for that. Also, DoCoMo may, at its
option, repair FOMA terminal by replacing it.
Regarding this FOMA terminal, the downloaded
data in FOMA terminal including images and
incoming melodies and the data you have
created can be transferred only when repairing
(some data cannot be transferred and
transferring may be unavailable depending on
the degree of malfunctions.)
* It may take some time to transfer or transferring
may be unavailable depending on the capacity
of the data stored in FOMA terminal.
Updating software
Software Update
This function checks for the necessity for updating
FOMA terminal software and downloads part of the
software as required through packet
communication*
1
to make updates of the software.
When software update is required, the information
will be posted on the DoCoMo website or
お知らせ
(Notice) in iMenu.
*1 Packet communication for software update is free
of charge.
･
Software may be updated in the following 2
methods:
･
Software cannot be updated in the following
cases:
･
At the time of updating software, the unique
information of your mobile phone terminal (model
or serial number, etc.) will be automatically sent
to the server (the server for updating software
managed by DoCoMo). DoCoMo will not use the
sent information for any other purpose than
software update.
･
Immediate update
：
Update on the spot as desired.
･
Advanced update
：
Reserve a day and time-slot for automatic
update of the software in the specified day
and time.
･
During All Lock
･
While executing other functions
･
When the date and time are not set
･
When the UIM is not inserted
･
When the battery is not fully charged
･
When PIN1 code is being entered
･
When PIN1 code is locked
･
When
圏外
is indicated
･
During PIM Lock
･
The power is off
･
When using overseas
･
In Self Mode on
･
While talking
･
During Omakase Lock (Remote Lock)
･
During packet communication connecting with
a PC
･
During 64K data communication
