160
Safety Settings
Preventing key errors
Key Lock
Disables the key operations and prevent wrong operations while you carry the terminal around by
putting it into the bag, etc.
･
Key Lock can be set/canceled even when the screen other than the standby display is displayed. However,
the setting is unavailable until the standby display appears after turning on the power.
1
Slide down the keylock switch and then take off your finger
When FOMA terminal is closed or Key Lock Setting is set to
Lock even slide open
,
Key Lock is set, and the standby display disappears.
･
The screen is still displayed and
is indicated on the upper part of the display in
the following cases:
・
When the shooting/recording screen of Camera is displayed or during the
shooting.
・
When
Normal use
of
Display light time
is set to
Always
in Display Light Setting.
・
When charging the battery in case
AC adapter connected
of
Display light time
of Display Light Setting is
set to
Always on
.
・
When executing functions in which
Display light time
of Display Light Setting is set to
Always
.
･
During a call, Key Lock is set in the state of temporary release and
(in gray) is indicated on the upper
part of the display. When a call is ended, Key Lock is set.
･
When Key Lock Setting is set to
OFF when slide open
, if you set Key Lock while FOMA terminal is opened,
Key Lock is set in the state of temporary release and
(in gray) is indicated on the upper part of the
display. When FOMA terminal is closed, Key Lock is set.
■
Canceling: Slide down the keylock switch and then take off your finger
Key Lock is canceled, and the display lights.
INFORMATION
●
When the power is turned off by Auto Power OFF while Key Lock is on or is released temporarily, Key Lock is canceled.
It is also the same as when the power is manually turned off during temporary release.
●
Even while Key Lock is on, the following key operations can be performed. And, if an incoming call is received or the call
is handled by Response and Hold or Answer Machine, Key Lock is released temporarily and the key operations can be
performed. If the call is ended, Key Lock is set again.
･
When there is a voice call, receiving the call by
n
or opening FOMA terminal (only when Open Answer is set to
ON
), putting the call on hold by
f
, handling the call by Answer Machine by holding down
C
for over a second
and stopping the ring alert by
C
.
･
When there is a videophone call, receiving the call by
n
or
t
, putting the call on hold by
f
, handling the call
by Answer Machine by holding down
C
for over a second and stopping the ring alert by
C
･
When there is a PushTalk call, answering the call by
g
or
n
, or notifying of
Disconnected
by
f
and stopping the
ring alert by
C
.
･
Stopping the alarm sound, etc.
･
Hold down a switch of the equipment such as a flat type earphone/microphone set with switch (optional) for over a
second to make a voice call or receive a voice/videophone call.
●
When the display disappears while Key Lock is on, pressing
f
, opening FOMA terminal or receiving calls lights the
display.
or
(in gray) is indicated on the upper part of the display.
Default
not set
Keylock switch
