38
Before Using D903i
Attaching/removing the battery pack
・
Turn the power off before attaching or removing the battery pack. Also, attach or remove it with FOMA
terminal closed using both hands.
・
Be careful not to touch the camera lens.
・
Use the specified battery pack D06.
INFORMATION
●
The FOMA terminal display uses an active LCD. Due to the characteristics of active LCD, residual images or crossbar
may remain for a while when the battery pack is attached or removed. This is not a fault of FOMA terminal.
Attaching the battery pack
a
Remove the rear cover.
While pressing the top of the rear cover with your
thumb, slide it in the direction of the arrow until it
is removed.
b
With the surface with the DoCoMo logo and
the recycle mark facing up, insert the battery
pack into FOMA terminal at the angle as
shown in the figure.
Do not force the battery pack into FOMA
terminal. Doing so could damage the body
connector or battery pack terminals.
c
Push the battery pack in.
d
Place the rear cover plate so that it can slide
about 1 mm on FOMA terminal.
e
Slide the rear cover in the direction of the
arrow pushing its center with your thumb so
that FOMA terminal and the rear cover do not
gap.
Failure to follow the correct procedure could
damage the rear cover.
Removing the battery pack
a
Remove the rear cover.
b
Lift the projection part of the battery pack
and remove it.
Press here.
Projection part