2
Required devices
The following hardware and software are required in
addition to FOMA terminal and a PC:
･
FOMA USB cable (optional)
･
Attched CD-ROM “CD-ROM for FOMA D903i”
INFORMATION
●
Purchase a dedicated “FOMA USB cable”. A USB
cable for PC cannot be used because the shape of
the connector does not fit.
Usage precautions
When using the Internet from PC, usage charge to
your Internet service provider (hereinafter called the
provider) is generally required. This charge is paid
directly to the provider, and is separate from the
FOMA service charge. For more information on
usage charges, contact your provider.
･
DoCoMo provides 2 Internet connection services:
mopera U and mopera.
The mopera U service requires subscription and
a monthly fee. It allows you to use broadband
Internet connection service, etc. There is also a
plan that requires a monthly fee only when you
use the service.
The mopera service allows you to access the
Internet without subscription and monthly fee.
You can make a connection with Internet
immediately.
For details such as on charges, visit the DoCoMo
website.
Different dialup connections are required for packet
communication and 64K data communication. When
performing packet communication, use the dialup
connection for FOMA packet communication. When
performing 64K data communication, use the dialup
connection for FOMA 64 kbps data communication or
ISDN synchronized 64 kbps data communication.
･
You cannot connect to access points of PHS 64K/
32K data communication such as PIAFS or DoPa.
Some dialup connections require user authentication (ID
and password) before a connection can be established.
If user authentication is required, you must use your
communication software or dialup network to enter your
ID and password before connection. Your ID and
password will be assigned by the provider or network
administrator of in-house LAN, etc. For more information,
contact your provider or network administrator.
To authenticate FirstPass (user certificate), you must
install FirstPass PC software from the attached CD-
ROM and configure it. For details, see “
簡易操作マニュ
アル
(Simple User’s Manual)(FirstPassManual.pdf)” in
the CD-ROM.
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use a FOMA USB cable
(optional).
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64 kbps or ISDN synchronized
64 kbps data communication.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
Internet service provider usage charge
Setting the dialup connection (provider, etc.)
User authentication during network access
Access authentication when using PC browser
Conditions of packet communication and
64K data communication
Glossary of data communication
●
Administrator privilege
A user level that provides complete access to all OS
functions in Windows XP and 2000. There must be
at least one user that has administrator privileges for
each PC. A user that has no administrator privileges
is not normally allowed to install/uninstall drivers and
software.
●
APN (Access Point Name)
String to identify a provider, etc. to connect by
packet communication. The APN for mopera U is
“mopera.net” and mopera is “mopera.ne.jp”.
●
cid (Context Identifier)
The registration number when writing packet
communication dialup connection (APN) information
to FOMA terminal. 10 numbers from 1 to 10 are
available for FOMA terminal.
By default, “mopera.ne.jp” is registered in cid1, and
“mopera.net” in cid3.
●
W-TCP
A TCP parameter designed to fully utilize TCP/IP
transmission capacity during packet
communications in a FOMA network. This
communication setting is essential to enable full use
of FOMA terminal capability.
D903i Manual for Data Commu.fm 2 ページ ２００６年１０月１２日 木曜日 午後５時４５分