63
Calls/Videophone Calls
1
Enter the phone number
z
(
z
Enter the sub-address
2
Press
n
(voice call) or
t
(videophone call)
･
The sub-address needs to be set on the other party’s phone or communication device.
INFORMATION
●
Even when Sub Address is set to
ON
, if “
” is entered after entering a pause, timed pause or “#”, it is not recognized
as a sub-address delimiter and sent as tone signals (DTMF) containing “
”.
Setting the alarm indicating reconnection of interrupted call
Reconnect Alarm
Set an alarm that is heard at the time of reconnecting a voice call, videophone call or PushTalk call
interrupted due to poor signal conditions in a tunnel or behind a building when signal conditions improve.
･
The other party hears no sound while signals are disrupted.
･
The time until the call is reconnected depends on line use or signal conditions. The approximate time is a
maximum of 10 seconds.
･
Note that the call is charged for the time until the call is reconnected (up to 10 seconds).
･
The call may be cut off before the alarm sounds depending on line use or signal conditions.
1
m81174
z
Press any of
1
to
3
Suppressing ambient noises to improve the call quality
Noise Reduction
By suppressing ambient noises during a call, the other party can hear your voice clearly and you can
also hear the other party’s voice clearly.
･
It is recommended that this function usually be set to
ON
.
1
m8471
2
Press
1
･
To cancel the setting:
2
Making a call by specifying a sub-address
Default
High alarm
Default
ON
