53
Calls/Videophone Calls
INFORMATION
●
Tone signals (DTMF) may not be received depending on the receiving device.
●
You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T).
Switching between a voice call and videophone call
You can switch between a voice call and a videophone call by operating from the submenu during a call
when the other party’s terminal can switch calls. Switching can be performed only from the terminal that
made the call.
・
This operation is available between the terminals that support switching between a voice call and
videophone call.
・
To switch calls, the other party needs to set
Indication ON
of Notify Switchable Mode in advance.
☛
P87
Switching a voice call to a videophone call
1
m1
during a voice call
z
Select
Yes
・
A guidance informing that the call is being switched is played during switching.
・
Select
No
to return to the voice call talking screen.
・
If
Speakerphone
is set to
ON
in Videophone Settings, the speakerphone is turned on when the call is
switched to a videophone call.
■
Switching a videophone call to a voice call:
m1
during a videophone call
z
Select
Yes
INFORMATION
●
During packet communication, disconnect the packet communication and switch to a videophone call.
●
When the other party is during packet communication, the call cannot be switched to a videophone call.
●
During a voice call using Call Waiting Service, you cannot switch the call to a videophone call.
●
It takes about 5 seconds to switch. However, it may take longer depending on radio wave conditions.
●
Depending on radio wave conditions, a voice call and videophone call may not be switched and the call may be disconnected.
●
The speakerphone function is turned off when a videophone call is switched to a voice call.
●
The settings (such as switching the cameras or selecting the frame) made during a videophone call are canceled when
a videophone call is switched to a voice call.
●
According to the call duration of a voice call and videophone call, the call charges are added up, respectively.
●
The call is not charged while
Switching...
is displayed.
Example