13
INFORMATION
●
The transmission speed displayed on your PC may
differ from actual speed.
●
Data transmission is available only with FOMA
terminal that was connected when the connection
icon was created.
●
When connecting FOMA terminal other than D903i,
installation of the communication configuration file
for your FOMA terminal is needed.
Just exiting the browser may not disconnect the
connection. To ensure disconnection, perform the
following operation:
For Windows XP
1
Click
in the task tray
2
Click
切断
(Disconnect)
Optimizing packet communication setup
Optimize the PC packet communication setup for
FOMA network by means of W-TCP setup.
The W-TCP setup is a TCP parameter tuning tool for
optimizing TCP/IP transmission capacity during packet
communication in the FOMA network. To enable
communication capability of FOMA terminal to
maximum extent, this communication setup is
required.
System optimization can be performed for each
dialup connection.
1
Start
FOMA PC
設定ソフト
(
☛
P7)
z
Click
W-TCP
設定
■
Starting from the task tray: Click
2
Perform the following operations:
■
When the system has not been optimized:
The following screen is displayed.
a
Select
384Kbps
and click
最適化を行う
b
Select the dialup connection to be
optimized
z
Click
実行
(Execute)
Optimization of the system settings and
dialup settings are performed respectively.
■
When the system has been optimized:
The following screen is displayed. Change the
check box and click
システム設定
(System
setting) if changes are to be made.
3
Reboot the PC following the instruction
shown on the screen
・
The settings take effect after rebooting the PC.
1
Start
FOMA PC
設定ソフト
(
☛
P7)
z
Click
W-TCP
設定
■
Starting from the task tray: Click
2
Click
最適化を行う
3
Reboot the PC following the instruction
shown on the screen
・
The settings take effect after rebooting the PC.
Disconnecting communication
For Windows XP
Example
For Windows 2000
D903i Manual for Data Commu.fm 13 ページ 2006年10月12日 木曜日 午後5時45分