431
Using Your FOMA Terminal Overseas
Setting the procedure for searching
service providers
Network Search Mode
When the current network of the service provider
is out of the service area, this function sets
whether to automatically search for a network and
reconnect to another service provider.
・
The setting may not be set depending on the
signal condition or the situation of networks.
・
As of October 2006, service providers other than
NTT DoCoMo cannot be selected in Japan.
・
In case of out of service area after returning to
Japan, please confirm that Network Search Mode
is set to
Auto
.
1
m8811
2
Press any of
1
to
3
Setting a service provider to be
connected with priority
PLMN Setting
When Network Search Mode is set to
Auto
, this
function adds service providers and sets priority
of a service provider that is to be connected.
・
Priority may be given to the service providers as
the priority set by this function depending on the
signal condition or the network situation.
・
The service providers are registered as a priority
network list designated by DoCoMo. Any service
provider that is already registered cannot be
registered again.
・
Up to 20 service providers can be registered.
1
m8813
2
m1
■
Manual registration:
a
1
z
Select
MCC
field
z
Enter a
country code (up to 3 digits)
b
Select
MNC
field
z
Enter an operator
code (up to 3 digits)
z
p
■
Selecting a service provider for registration:
a
2
b
Select a country name
・
Selecting
All Countries
displays all the
service providers.
c
Highlight a service provider
z
p
・
When you want to display the detail
information, you need to select a service
provider.
d
Select the position of priority
The service provider is added before the
selected position.
・
Selecting <
Insert last
> (Select last)
makes the service provider added at the
end of the list.
■
Registering a service provider being
currently connected:
a
3
z
Select a service provider
z
p
b
Select the position of priority
The service provider is added before the
selected position.
・
Selecting <
Insert last
> (Select last)
makes the service provider added at the
end of the list.
3
Press
p
Default
Auto
Auto
:
The setting is automatically made to a
connectable network.
Manual
:
A list of connectable networks is displayed.
Select the connection destination.
・
Press
m
in the network list when you
want to search for a network again.
Network re-search
:
This operation searches for a connectable
network again.
・
If
Auto
is set, you are automatically
connected to the network.
・
If
Manual
is set, a list of connectable
networks is displayed. Select the
connection destination.
Registering the service providers
Next
▲