69
Calls/Videophone Calls
Adjusting the volume of ring alerts and other sounds emitted from FOMA terminal
Adjust Volume
Adjust the volume of call, PushTalk, mail and Message R/F ring alerts, alarm clock, schedule alarm,
i-
α
ppli sounds, and the sound that plays when obtaining ToruCa.
・
The volume can be adjusted in 7 levels, from
silent
to level 1
to level 6 (the volume of Movie ringtone can
also be adjusted in 7 levels). You can also set
STEPTONE
(the volume changes into
silent
→
level 1
→
...
→
level 6 about every 3 seconds) in standby.
Adjusting the volume of ring alerts while receiving
・
The ring volume changed while receiving a call is reset to the original volume when a call or PushTalk is
ended.
1
%
while receiving a call
z
O
to adjust the volume
The volume is set automatically by pressing
o
or waiting for a while after you stop key operations.
・
To turn up the volume:
u
or
r
・
To turn down the volume:
d
or
l
INFORMATION
●
To stop the ring alert and vibrator:
C
while receiving a call
●
While receiving a call, the ring volume cannot be set to
STEPTONE
.
Adjusting the volume of ring alerts and other sounds in standby
・
Listen volume
cannot be set to
silent
.
・
Listen volume
,
i-
α
ppli
effect sound
and
ToruCa receive alert
cannot be set to
STEPTONE
.
・
The ring volume changed while in standby is retained even if the power is turned off.
1
m812
2
1
to
4
,
6
or
7
■
Adjusting the volume of alarm clock:
51
■
Adjusting the volume of schedule alarm:
52
Default
Level 4 (all)
Call alert volume
:
Adjusts the ring volume for voice calls, videophone calls and PushTalk calls.
The set volume also applies to the following sounds:
・
Timer alarm
・
Alarm for Call Cost Limit
・
Sound indicating the battery level
・
Playback sound of melodies attached to mail
Mail/Msg alert vol.
:
Adjusts the ring volume for mails, chat mails and Message R/Fs.
GPS alert volume
:
Adjusts the volume of sound that plays when positioning with the GPS function
(Position Location, Location Request and Notify Location).
Listen volume
:
Adjusts the earpiece volume during a voice call, videophone call and PushTalk call.
The set volume also applies to the following sounds:
・
Keypad sound
・
Sound of rotating the Speed Selector
・
Playback sound of voice call messages
・
Playback sound of voice memos
Alarm volume
(
Alarm clock sound
/
Schedule reminder
):
Adjusts the volume of alarm clock that will be used when the volume is set to
Terminal setting
on the
Set sound
screen of Alarm Clock. Also adjusts the volume of
schedule alarm.
i-
α
ppli effect sound
:
Adjusts the volume of effect sound for i-
α
ppli.
Next
▲