Docomo FOMA D903i, Руководство пользователя

Страница: 300 / 537

297 GPS Function
･
The display items should be interpreted as
follows:
: Recipient name : Requester name* 1
: Requester ID
*1 If the requester ID matches the phone number
or mail address registered in the phonebook,
the name registered in the phonebook is
displayed.
INFORMATION
●
In Public mode (Driving mode), the Location Request
function proceeds as follows.
･
If you set 毎回確認 for the usage setting on a per-
service basis, no location information is provided in
response to a request for Location Request in Public
mode (Driving mode).
･
If you set 許可 for the usage setting on a per-service
basis, the sound, vibration, or lighting used for
positioning does not operate. In this case, only the
screen is displayed and the location information is also
provided.
●
Depending on signal conditions, location information that
has actually been sent may fail to reach the GPS service
provider or the imadoco-search searcher.
Setting whether Location Request is enabled
Request Permit/Deny
Here you set whether Location Request is permitted
in a request for Location Request.
Permitting Location Request
1
m6961 z
Enter the
terminal security code
2 Press
1
■ Denying location requests:
2
■
Permitting location requests only for a
specified period:
3 z
Select each item
to set
z p
■ When the Repeat setting is None
･
If you set a start time later than the current time,
the setting is enabled from the start time on this
day.
･
If the start time is earlier than the current time and
the end time is later than the current time, the
setting is enabled from the current time till the
end time.
･
If the start time and the end time are both earlier
than the current time, the setting is enabled on
the next day from the start time till the end time.
･
If you set the end time as a value which is the
same as, or earlier than, the start time, the setting
is enabled until the end time of the next day.
When the current time is 10:00
■
If the Repeat setting is Every day or Day of week
and the Date setting is None or Specify start date .
Starting this day or with the specified start date,
location requests are permitted during the period
from the start time to the end time.
Default Always deny
Start
：
Enter the time to start the Location
Request function.
End
：
Enter the time to end the Location
Request function.
Example
Repeat
：
･
If you set None , the Location Request
function is enabled only once.
･
If you set Every day , the Location
Request function is enabled everyday
from the start time through the end time.
･
If you select Day of week , select Day/
Week to select the days of the week and
press
p
.
Date ：
Set
Specify start date
or
Specify start/end
when you set the period during which
Location Request is enabled.
･
This setting is required only when you
set the
Repeat
setting as
Every day
or
Day of week
.
Start
：
Enter this when you set Specify start date or
Specify start/end as the effective period.
End ：
Enter this when you set
Specify start/end
as
the effective period.
General notes regarding the permission period
setting
Example setup
Period permitted
Start time End time
11:00 18:00 11:00 to 18:00 on this day
09:00 17:00 10:00 to 17:00 on this day
06:00 09:00 6:00 to 9:00 on next day
11:00 10:00
11:00 on this day to 10:00 on
next day
09:00 08:00
10:00 on this day to 8:00 on
next day
Example
Next
▲