D-Link 5000 Series, Справочное руководство CLI

Страница: 876 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
870
spf-hold Indicates the initial SPF “wait interval” in milliseconds. Value range is 1
to 600000 milliseconds.
spf-maximum Indicates the maximum SPF “wait interval" in milliseconds. Value range
is 1 to 600000 milliseconds.
Default
The default is as follows:
•
spf-start = 2000 ms
•
spf-hold = 5000 ms
•
spf-maximum = 5000 ms
Command Mode
Privileged EXEC
8-92 trapflags (OSPFv3)
Enables individual OSPF traps, enables a group of trap flags simultaneously, or enables all the trap flags
simultaneously. The different groups of trapflags, and each one of a group’s specific trapflags that are to
be enabled or disabled, are listed in Table 12.
Table 12: Trapflag Groups (OSPFv3)
Group Flags
Errors
•
authentication-failure
•
bad-packet
•
config-error
•
virt-authentication-failure
•
virt-bad-packet
•
virt-config-error
Isa
•
Isa-maxage
•
Isa-originate
overflow
•
lsdb-overflow
•
lsdb-approaching-overflow
retransmit
•
packets
•
virt-packets
state-change
•
if state-change
•
neighbor-state-change
•
virtif-state-change
•
virtneighbor-state-change
•
To enable
an individual flag, enter the group name followed by the name of that particular flag.
•
To enable all of the flags in a group, enter the group name followed by all .
•
To enable all of the flags, enter the command as trapflags all .