D-Link 5000 Series, Справочное руководство CLI

Страница: 970 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
964
9-39 show ip pim neighbor
Shows the PIM neighbors discovered by PlMv2 Hello messages. The slot/port argument corresponds to
either a physical routing interface or to a VLAN routing interface. The keyword VLAN is utilized, instead of
the slot/port format, to directly specify the VLAN ID of the routing VLAN. If an interface is not specified,
then the command shows the status parameters for all PIM-enabled interfaces.
show ip pim neighbor [{slot/port | vlan 1-4093}]
Parameters
slot/port Indicates an interface in slot/port format.
vlan 1-4093 Indicates an interface in VLAN format (1-4093).
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show ip pim neighbor 0/1
Neighbor Addr Interface Uptime (hh:mm:ss) Expiry Time (hh:mm:ss) DR Priority
------------- ---------- ----------------- ----------------------- ------------
192.168.10.2 0/1 00:02:55 00:01:15 NA
(Routing)#show ip pim neighbor
Neighbor Addr Interface Uptime (hh:mm:ss) Expiry Time (hh:mm:ss) DR Priority
------------- ---------- ----------------- ----------------------- ------------
192.168.10.2 0/1 00:02:55 00:01:15 1
192.168.20.2 0/2 00:03:50 00:02:10 1
The following message will be displayed if no neighbors have been learned by any of the interfaces:
No neighbors exist on the router.
Display Parameters
Neighbor Addr The IP address of the PIM neighbor on an interface.
Interface slot/port
Up Time (hh:mm:ss) The time since this neighbor has become active on this interface.