D-Link 5000 Series, Справочное руководство CLI

Страница: 904 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
898
Parameters
None
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show ipv6 ospf statistics
Area 0.0.0.0: SPF algorithm executed 10 times
Delta T Intra Summ Ext SPF Total RIB Update Reason
23:32:46 0 0 0 0 0 R, IP
23:32:09 0 0 0 0 0 R, N, IP
23:32:04 0 0 0 0 0 R
23:31:44 0 0 0 0 0 R, N, IP
23:31:39 0 0 0 0 1 R
23:29:57 0 3 7 10 131 R
23:29:52 0 14 29 43 568 SN
04:07:23 0 9 23 33 117 SN
04:07:23 0 9 23 33 117 SN
04:07:18 0 0 0 1 485 SN
04:07:14 0 1 0 1 3 X
Display Parameters
The following information will be displayed, with the most recent statistics shown at the end of the table.
Delta T
The time since the routing table was computed. The time is in the format
hours, minutes, and seconds (hh:mm:ss).
Intra The time taken to compute intra-area routes, in milliseconds.
Summ The time taken to compute inter-area routes, in milliseconds.
Ext The time taken to compute external routes, in milliseconds.
SPF Total The total time taken to compute routes, in milliseconds. The total may
exceed the sum of lntra, Summ, and Ext times.
RIB Update The time from the completion of the routing table calculation until all
changes have been made in the common routing table [the Routing
lnformation Base (RlB)], in milliseconds.