D-Link 5000 Series, Справочное руководство CLI

Страница: 208 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
202
Command Mode
Privileged EXEC
5-69 mail-server
This command is used to configure the SMTP server to which email alert messages are sent by the
switch and also to change the mode to the Mail Server Configuration mode. The address of the server
can be in either the IPv4 or DNS name format.
The no command is used to remove the previously specified SMTP server from the configuration.
mail-server {ip-address | ipv6address | hostname}
no mail-server {ip-address | ipv6address | hostname}
Parameters
ipaddress Indicates the IP address of the mail server.
Ipv6address Indicates the IPv6 address of the mail server.
Host-name Indicates the hostname of the mail server.
Default
The default is None.
Command Mode
Global Config
5-70 security
This command is used to set the email alerting security protocol by enabling the use of TLS
authentication by the switch with the SMTP Server. However, no email will be sent to the SMTP server if
the TLS mode is enabled on the switch but is not supported by the SMTP server itself.
security {tlsv1 | none}
Parameters
none Indicates normal socket communication.
tlsv1 Indicates TLSv1 socket communication.
Default
The default is None.