5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
526
5-521 lldp receive
Use this command to enable the LLDP receive capability on an interface or a range of interfaces.
Use the
no
command to return the reception of LLDPDUs to the default value.
lldp receive
no lldp receive
Parameters
None
Default
The default is Disabled.
Command Mode
Interface Config
5-522 lldp timers
Use this command to set the timing parameters for local data transmission on ports enabled for LLDP.
The
interval-seconds
determines the number of seconds to wait between transmitting local data
LLDPDUs. The range is 1-32768 seconds. The
hold- value
is the multiplier on the transmit interval that
sets the TTL in local data LLDPDUs. The multiplier range is 2-10. The
reinit-seconds
is the delay before
reinitialization, and the range is 1-0 seconds.
Use the
no
command to return any or all timing parameters for local data transmission on ports enabled
for LLDP to the default values.
lldp timers [interval interval-seconds] [hold hold-value] [reinit reinit-seconds]
no lldp timers [interval] [hold] [reinit]
Parameters
interval interval-seconds
(Optional) The interval in seconds to transmit local LLDP data.
hold hold-value
(Optional) The interval multiplier to set local LLDP data TTL.
reinit reinit-seconds
(Optional) The delay before re-initialization.
Default
The default is as follows:
•
Interval – 30 seconds
•
hold – 4
•
reinit – 2 seconds
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
