D-Link 5000 Series, Справочное руководство CLI

Страница: 1233 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1227
Component Message Cause
NIM NIM: failed to send message to NIM
message Queue. NIM message queue full or non-existent.
NIM NIM: Failed to notify the
components of L7_CREATE event Interface not created.
NIM NIM: Attempted event (x), on USP
x.x.x before phase 3 A component issued an interface event
during the wrong initialization phase.
NIM NIM: incorrect phase for operation An API call was made during the wrong
initialization phase.
NIM NIM: Component(x) failed on
event(x) for interface A component responded with a fail
indication for an interface event.
NIM NIM: Timeout event(x), interface
remainingMask = xxxx A component did not respond before the
NIM timeout occurred.
Table 17: SIM Log Message
Component Message Cause
SIM IP address conflict on service
port/network port for IP address
x.x.x.x. Conflicting host MAC
address is xx:xx:xx:xx:xx:xx This message appears when an address
conflict is detected in the LAN for the
service port/network port IP.
Table 18: System Log Messages
Component Message Cause
Component Message Cause
SIM IP address conflict on service
port/network port for IP address
x.x.x.x. Conflicting host MAC
address is xx:xx:xx:xx:xx:xx This message appears when an address
conflict is detected in the LAN for the
service port/network port IP.
Component Message Cause
SIM IP address conflict on service
port/network port for IP address
x.x.x.x. Conflicting host MAC
address is xx:xx:xx:xx:xx:xx This message appears when an address
conflict is detected in the LAN for the
service port/network port IP.
Utilities
Table 19: Trap Mgr Log Message
Component Message Cause