D-Link 5000 Series, Справочное руководство CLI

Страница: 108 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
102
show snmp views [viewname]
Parameters
viewname (Optional) Select the SNMP view name to display its configuration.
Default
The default is None.
Command Mode
Privileged EXEC
Example
The following is an example of the CLI display output for the command.
(Routing)#show snmp views
Name OID Tree Type
--------------- -------------------- ----------
Default iso Included
Default snmpVacmMIB Excluded
Default usmUser Excluded
Default snmpCommunityTable Excluded
DefaultSuper iso Included
Display Parameters
Name Indicates the view name for the given entry.
OID Tree Indicates the OID tree that the given entry will include or exclude.
Type Indicates whether or not the given entry includes or excludes the OID
tree.
4-117 show trapflags
This command is used to show the trap conditions. The display for the command shows all of the enabled
trapflags. By enabling or disabling the trap condition, the user can configure which traps the switch should
generate. In the event that a trap condition is enabled and is detected, the trap is sent by the SNMP agent
on the switch to all enabled trap receivers. It is not necessary for the user to reset the switch in order to
implement any changes. Both cold and warm start traps are continuously generated, and these traps
cannot be disabled.
show trapflags