D-Link 5000 Series, Справочное руководство CLI

Страница: 21 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
15
Command Mode Access Method
Policy-Class-Map Config Enter
class <classname>
while in the Policy Map mode.
Note: A given classname should be created using the
class-map
command.
Class-Map Config
Enter
class-map match-all <class-map-name>
while in the Global
Config mode, and then use either the optional keyword
ipv4
or
ipv6
to
specify the Layer 3 protocol for this class.
Router OSPF Config Enter
router ospf
while in the Global Config mode.
BGP Router Config
Enter
router bgp asnumber
while in the Global Config mode.
Route Map Config
Enter
route-map map -tag
while in the Global Config mode.
IPv6 Address Family
Config
Enter
address-family ipv6
while in the BGP Router Config mode,.
Peer Template Config Enter
template peer name
while in the BGP Router Config mode to
create a BGP peer template and to enter the Peer Template Configuration
mode.
Peer Template Address
Family Config Enter
address-family {ipv4 | ipv6)
while in the Peer Template
Config mode.
MAC Access-list Config
Enter
mac access-list extended name
while in the Global Config
mode.
IPv6 Access-list Config Enter
ipv6 access-list name
while in the Global Config mode.
Management Access-list
Config
Enter
management access-list name
while in the Global Config
mode.
Config Enter
tacacs-server host ip-addr
, where
ip-addr
is the IP
address of the server on your network, while in the Global
Config mode.
ARP Access-List Config
Enter the
arp access-list
command while in the Global Config mode.
User-Group Configuration
Mode Enter the
usergroup < usergroup-name >
command while in the
Global Config mode.
Task-Group Configuration
Mode
Enter the
taskgroup < taskgroup-name >
command while in the
Global Config mode.
Command Completion and Abbreviation
When the user types enough letters of a command to uniquely identify the command keyword, the
command completion feature finishes spelling the command for the user. Once the user has entered
enough letters, simply pressing the SPACEBAR or TAB key will complete the word.
Command abbreviation lets the user execute a command when the user has entered enough letters to
uniquely identify the command. The user must, however, enter all of the required parameters and
keywords before entering the command.