D-Link 5000 Series, Справочное руководство CLI

Страница: 1246 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1240
Component Message Cause
DiffServ Policy invalid for service intf: policy
name , interface x , direction y
The DiffServ policy definition is not
compatible with the capabilities of the
interface specified. Check the platform
release notes for information on
configuration limitations.
Routing/IPv6 Routing
Table 48: DHCP Relay Log Messages
Component Message Cause
DHCP relay Request hops field more than
config value The DHCP relay agent has processed a
DHCP request whose HOPS field is larger
than the maximum value allowed. The relay
agent will not forward a message with a
hop count greater than 4.
DHCP relay Request’s seconds field less than
the config value The DHCP relay agent has processed a
DHCP request whose SECS field is larger
than the configured minimum wait time
allowed.
DHCP relay processDhcpPacket: invalid DHCP
packet type: %u\n The DHCP relay agent has processed an
invalid DHCP packet. Such packets are
discarded by the relay agent.
Table 49: OSPFv2 Log Messages
Component Message Cause
OSPFv2 Best route client deregistration
failed for OSPF Redist OSPFv2 registers with the lPv4 routing
table manager (“RTO”) to be notified of
best route changes. There are cases where
OSPFv2 deregisters more than once,
causing the second deregistration to fail.
The failure is harmless.
OSPFv2 XX_Call() failure in _checkTimers
for thread 0x869bcc0 An OSPFv2 timer has fired but the
message queue that holds the event has
filled up. This is normally a fatal error.