5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
1180
Parameters
policymapname
The name of an existing DiffServ policy, whose type must match the
interface direction. The command causes a service to create a reference
to the policy.
Default
The default is None.
Command Mode
•
Global Config
•
Interface Config
DiffServ Show Commands
Use the DiffServ show commands to display configuration and status information for classes, policies,
and services. You can display DiffServ information in summary or detailed formats. The status information
is only shown when the DiffServ administrative mode is enabled.
12-58 show class-map
This command displays all configuration information for the specified class. The
class-name
is the name
of an existing DiffServ class.
show class-map class-name
Parameters
class-name
Enter the name of an existing DiffServ class.
Default
The default is None.
Command Mode
•
Privileged EXEC
•
User EXEC
Display Parameters
lf the
class-name
is specified the following fields are displayed.
Class Name
The name of this class.
Class Type
A class type of all means every match criterion defined for the class is
evaluated simultaneously and must all be true to indicate a class match.
L3 Proto
The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.
Содержание 5000 Series
Страница 1: ...Draft 1 2 1 ...
Страница 141: ...5000 Series Layer 2 3 Managed Data Center Switch CLI Reference Guide 135 ...
